base (version 3.3.0)

Startup: Initialization at Start of an R Session

Description

In R, the startup mechanism is as follows.

Unless --no-environ was given on the command line, R searches for site and user files to process for setting environment variables. The name of the site file is the one pointed to by the environment variable R_ENVIRON; if this is unset, ‘R_HOME/etc/Renviron.site’ is used (if it exists, which it does not in a ‘factory-fresh’ installation). The name of the user file can be specified by the R_ENVIRON_USER environment variable; if this is unset, the files searched for are ‘.Renviron’ in the current or in the user's home directory (in that order). See ‘Details’ for how the files are read.

Then R searches for the site-wide startup profile file of R code unless the command line option --no-site-file was given. The path of this file is taken from the value of the R_PROFILE environment variable (after tilde expansion). If this variable is unset, the default is ‘R_HOME/etc/Rprofile.site’, which is used if it exists unix (which it does not in a ‘factory-fresh’ installation). windows (it contains settings from the installer in a ‘factory-fresh’ installation). This code is sourced into the base package. Users need to be careful not to unintentionally overwrite objects in base, and it is normally advisable to use local if code needs to be executed: see the examples.

Then, unless --no-init-file was given, R searches for a user profile, a file of R code. The path of this file can be specified by the R_PROFILE_USER environment variable (and tilde expansion will be performed). If this is unset, a file called ‘.Rprofile’ is searched for in the current directory or in the user's home directory (in that order). The user profile file is sourced into the workspace.

Note that when the site and user profile files are sourced only the base package is loaded, so objects in other packages need to be referred to by e.g.\ifelse{latex}{\out{~}}{ } utils::dump.frames or after explicitly loading the package concerned.

R then loads a saved image of the user workspace from ‘.RData’ in the current directory if there is one (unless --no-restore-data or --no-restore was specified on the command line).

Next, if a function .First is found on the search path, it is executed as .First(). Finally, function .First.sys() in the base package is run. This calls require to attach the default packages specified by options("defaultPackages"). If the methods package is included, this will have been attached earlier (by function .OptRequireMethods()) so that namespace initializations such as those from the user workspace will proceed correctly.

A function .First (and .Last) can be defined in appropriate ‘.Rprofile’ or ‘Rprofile.site’ files or have been saved in ‘.RData’. If you want a different set of packages than the default ones when you start, insert a call to options in the ‘.Rprofile’ or ‘Rprofile.site’ file. For example, options(defaultPackages = character()) will attach no extra packages on startup (only the base package) (or set R_DEFAULT_PACKAGES=NULL as an environment variable before running R). Using options(defaultPackages = "") or R_DEFAULT_PACKAGES="" enforces the R system default.

On front-ends which support it, the commands history is read from the file specified by the environment variable R_HISTFILE (default ‘.Rhistory’ in the current directory) unless --no-restore-history or --no-restore was specified.

The command-line option --vanilla implies --no-site-file, --no-init-file, --no-environ and (except for R CMD) --no-restore windows Under Windows, it also implies --no-Rconsole, which prevents loading the ‘Rconsole’ file.

Details

Note that there are two sorts of files used in startup: environment files which contain lists of environment variables to be set, and profile files which contain R code.

Lines in a site or user environment file should be either comment lines starting with #, or lines of the form name=value. The latter sets the environmental variable name to value, overriding an existing value. If value contains an expression of the form ${foo-bar}, the value is that of the environmental variable foo if that exists and is set to a non-empty value, otherwise bar. (If it is of the form ${foo}, the default is "".) This construction can be nested, so bar can be of the same form (as in ${foo-${bar-blah}}). Note that the braces are essential: for example $HOME will not be interpreted.

Leading and trailing white space in value are stripped. value is then processed in a similar way to a Unix shell: in particular the outermost level of (single or double) quotes is stripped, and backslashes are removed except inside quotes.

On systems with sub-architectures (mainly Windows), the files ‘Renviron.site’ and ‘Rprofile.site’ are looked for first in architecture-specific directories, e.g.\ifelse{latex}{\out{~}}{ } ‘R_HOME/etc/i386/Renviron.site’. And e.g.\ifelse{latex}{\out{~}}{ } ‘.Renviron.i386’ will be used in preference to ‘.Renviron’.

See Also

For the definition of the ‘home’ directory on Windows see the ‘rw-FAQ’ Q2.14. It can be found from a running R by Sys.getenv("R_USER").

.Last for final actions at the close of an R session. commandArgs for accessing the command line arguments.

There are examples of using startup files to set defaults for graphics devices in the help for windows windows.options. unix X11 and quartz.

An Introduction to R for more command-line options: those affecting memory management are covered in the help file for Memory.

readRenviron to read ‘.Renviron’ files.

For profiling code, see Rprof.

Examples

## Not run: 
# ## Example ~/.Renviron on Unix
# R_LIBS=~/R/library
# PAGER=/usr/local/bin/less
# 
# ## Example .Renviron on Windows
# R_LIBS=C:/R/library
# MY_TCLTK="c:/Program Files/Tcl/bin"
# 
# ## Example of setting R_DEFAULT_PACKAGES (from R CMD check)
# R_DEFAULT_PACKAGES='utils,grDevices,graphics,stats'
# # this loads the packages in the order given, so they appear on
# # the search path in reverse order.
# 
# ## Example of .Rprofile
# options(width=65, digits=5)
# options(show.signif.stars=FALSE)
# setHook(packageEvent("grDevices", "onLoad"),
#         function(...) grDevices::ps.options(horizontal=FALSE))
# set.seed(1234)
# .First <- function() cat("\n   Welcome to R!\n\n")
# .Last <- function()  cat("\n   Goodbye!\n\n")
# 
# ## Example of Rprofile.site
# local({
#   # add MASS to the default packages, set a CRAN mirror
#   old <- getOption("defaultPackages"); r <- getOption("repos")
#   r["CRAN"] <- "http://my.local.cran"
#   options(defaultPackages = c(old, "MASS"), repos = r)
#   ## (for Unix terminal users) set the width from COLUMNS if set
#   cols <- Sys.getenv("COLUMNS")
#   if(nzchar(cols)) options(width = as.integer(cols))
#   # interactive sessions get a fortune cookie (needs fortunes package)
#   if (interactive())
#     fortunes::fortune()
# })
# 
# ## if .Renviron contains
# FOOBAR="coo\bar"doh\ex"abc\"def'"
# 
# ## then we get
# # > cat(Sys.getenv("FOOBAR"), "\n")
# # coo\bardoh\exabc"def'
# ## End(Not run)