spatstat (version 1.31-2)

Fest: Estimate the empty space function F

Description

Estimates the empty space function $F(r)$ from a point pattern in a window of arbitrary shape.

Usage

Fest(X, ..., eps, r=NULL, breaks=NULL, correction=c("rs", "km", "cs"))

Arguments

X
The observed point pattern, from which an estimate of $F(r)$ will be computed. An object of class ppp, or data in any format acceptable to as.ppp().
...
Ignored.
eps
Optional. A positive number. The resolution of the discrete approximation to Euclidean distance (see below). There is a sensible default.
r
Optional. Numeric vector. The values of the argument $r$ at which $F(r)$ should be evaluated. There is a sensible default. First-time users are strongly advised not to specify this argument. See below for important conditions on $r$.
breaks
An alternative to the argument r. Not normally invoked by the user. See the Details section.
correction
Optional. The edge correction(s) to be used to estimate $F(r)$. A vector of character strings selected from "none", "rs", "km", "cs" and "best".

Value

  • An object of class "fv", see fv.object, which can be plotted directly using plot.fv.

    Essentially a data frame containing up to seven columns:

  • rthe values of the argument $r$ at which the function $F(r)$ has been estimated
  • rsthe ``reduced sample'' or ``border correction'' estimator of $F(r)$
  • kmthe spatial Kaplan-Meier estimator of $F(r)$
  • hazardthe hazard rate $\lambda(r)$ of $F(r)$ by the spatial Kaplan-Meier method
  • csthe Chiu-Stoyan estimator of $F(r)$
  • rawthe uncorrected estimate of $F(r)$, i.e. the empirical distribution of the distance from a random point in the window to the nearest point of the data pattern X
  • theothe theoretical value of $F(r)$ for a stationary Poisson process of the same estimated intensity.

Warnings

The reduced sample (border method) estimator of $F$ is pointwise approximately unbiased, but need not be a valid distribution function; it may not be a nondecreasing function of $r$. Its range is always within $[0,1]$.

The spatial Kaplan-Meier estimator of $F$ is always nondecreasing but its maximum value may be less than $1$.

The estimate of $\lambda(r)$ returned by the algorithm is an approximately unbiased estimate for the integral of $\lambda()$ over the corresponding histogram cell. It may exhibit oscillations due to discretisation effects. We recommend modest smoothing, such as kernel smoothing with kernel width equal to the width of a histogram cell.

Details

The empty space function (also called the ``spherical contact distribution'' or the ``point-to-nearest-event'' distribution) of a stationary point process $X$ is the cumulative distribution function $F$ of the distance from a fixed point in space to the nearest point of $X$.

An estimate of $F$ derived from a spatial point pattern dataset can be used in exploratory data analysis and formal inference about the pattern (Cressie, 1991; Diggle, 1983; Ripley, 1988). In exploratory analyses, the estimate of $F$ is a useful statistic summarising the sizes of gaps in the pattern. For inferential purposes, the estimate of $F$ is usually compared to the true value of $F$ for a completely random (Poisson) point process, which is $$F(r) = 1 - e^{ - \lambda \pi r^2}$$ where $\lambda$ is the intensity (expected number of points per unit area). Deviations between the empirical and theoretical $F$ curves may suggest spatial clustering or spatial regularity.

This algorithm estimates the empty space function $F$ from the point pattern X. It assumes that X can be treated as a realisation of a stationary (spatially homogeneous) random spatial point process in the plane, observed through a bounded window. The window (which is specified in X) may have arbitrary shape.

The argument X is interpreted as a point pattern object (of class "ppp", see ppp.object) and can be supplied in any of the formats recognised by as.ppp.

The algorithm uses two discrete approximations which are controlled by the parameter eps and by the spacing of values of r respectively. (See below for details.) First-time users are strongly advised not to specify these arguments.

The estimation of $F$ is hampered by edge effects arising from the unobservability of points of the random pattern outside the window. An edge correction is needed to reduce bias (Baddeley, 1998; Ripley, 1988). The edge corrections implemented here are the border method or "reduced sample" estimator, the spatial Kaplan-Meier estimator (Baddeley and Gill, 1997) and the Chiu-Stoyan estimator (Chiu and Stoyan, 1998).

Our implementation makes essential use of the distance transform algorithm of image processing (Borgefors, 1986). A fine grid of pixels is created in the observation window. The Euclidean distance between two pixels is approximated by the length of the shortest path joining them in the grid, where a path is a sequence of steps between adjacent pixels, and horizontal, vertical and diagonal steps have length $1$, $1$ and $\sqrt 2$ respectively in pixel units. If the pixel grid is sufficiently fine then this is an accurate approximation.

The parameter eps is the pixel width of the rectangular raster used to compute the distance transform (see below). It must not be too large: the absolute error in distance values due to discretisation is bounded by eps.

If eps is not specified, the function checks whether the window X$window contains pixel raster information. If so, then eps is set equal to the pixel width of the raster; otherwise, eps defaults to 1/100 of the width of the observation window.

The argument r is the vector of values for the distance $r$ at which $F(r)$ should be evaluated. It is also used to determine the breakpoints (in the sense of hist for the computation of histograms of distances. The estimators are computed from histogram counts. This introduces a discretisation error which is controlled by the fineness of the breakpoints.

First-time users would be strongly advised not to specify r. However, if it is specified, r must satisfy r[1] = 0, and max(r) must be larger than the radius of the largest disc contained in the window. Furthermore, the spacing of successive r values must be very fine (ideally not greater than eps/4).

The algorithm also returns an estimate of the hazard rate function, $\lambda(r)$, of $F(r)$. The hazard rate is defined by $$\lambda(r) = - \frac{d}{dr} \log(1 - F(r))$$ The hazard rate of $F$ has been proposed as a useful exploratory statistic (Baddeley and Gill, 1994). The estimate of $\lambda(r)$ given here is a discrete approximation to the hazard rate of the Kaplan-Meier estimator of $F$. Note that $F$ is absolutely continuous (for any stationary point process $X$), so the hazard function always exists (Baddeley and Gill, 1997).

The naive empirical distribution of distances from each location in the window to the nearest point of the data pattern, is a biased estimate of $F$. However this is also returned by the algorithm (if correction="none"), as it is sometimes useful in other contexts. Care should be taken not to use the uncorrected empirical $F$ as if it were an unbiased estimator of $F$.

References

Baddeley, A.J. Spatial sampling and censoring. In O.E. Barndorff-Nielsen, W.S. Kendall and M.N.M. van Lieshout (eds) Stochastic Geometry: Likelihood and Computation. Chapman and Hall, 1998. Chapter 2, pages 37-78. Baddeley, A.J. and Gill, R.D. The empty space hazard of a spatial pattern. Research Report 1994/3, Department of Mathematics, University of Western Australia, May 1994.

Baddeley, A.J. and Gill, R.D. Kaplan-Meier estimators of interpoint distance distributions for spatial point processes. Annals of Statistics 25 (1997) 263-292.

Borgefors, G. Distance transformations in digital images. Computer Vision, Graphics and Image Processing 34 (1986) 344-371.

Chiu, S.N. and Stoyan, D. (1998) Estimators of distance distributions for spatial patterns. Statistica Neerlandica 52, 239--246. Cressie, N.A.C. Statistics for spatial data. John Wiley and Sons, 1991.

Diggle, P.J. Statistical analysis of spatial point patterns. Academic Press, 1983.

Ripley, B.D. Statistical inference for spatial processes. Cambridge University Press, 1988.

Stoyan, D, Kendall, W.S. and Mecke, J. Stochastic geometry and its applications. 2nd edition. Springer Verlag, 1995.

See Also

Gest, Jest, Kest, km.rs, reduced.sample, kaplan.meier

Examples

Run this code
data(cells)
   Fc <- Fest(cells, 0.01)

   # Tip: don't use F for the left hand side!
   # That's an abbreviation for FALSE

   plot(Fc)

   # P-P style plot
   plot(Fc, cbind(km, theo) ~ theo)

   # The empirical F is above the Poisson F
   # indicating an inhibited pattern

   plot(Fc, . ~ theo)
   plot(Fc, asin(sqrt(.)) ~ asin(sqrt(theo)))

Run the code above in your browser using DataCamp Workspace