This function calculates the future annual probability of failure per kilometer 3-132kV OHL conductors. The function is a cubic curve that is based on the first three terms of the Taylor series for an exponential function. For more information about the probability of failure function see section 6 on page 30 in CNAIM (2017).
pof_future_ohl_cond_132_66_33kv(
ohl_conductor = "66kV OHL (Tower Line) Conductor",
sub_division = "Cu",
placement = "Default",
altitude_m = "Default",
distance_from_coast_km = "Default",
corrosion_category_index = "Default",
age,
conductor_samp = "Default",
corr_mon_survey = "Default",
visual_cond = "Default",
midspan_joints = "Default",
reliability_factor = "Default",
simulation_end_year = 100
)String.
A sting that refers to the specific asset category.
See See page 15, table 1 in CNAIM (2017).
Options:
ohl_conductor = c("33kV OHL (Tower Line) Conductor",
"66kV OHL (Tower Line) Conductor", "132kV OHL (Tower Line) Conductor").
The default setting is
ohl_conductor = "66kV OHL (Tower Line) Conductor".
String. Refers to material the conductor is
made of. Options:
sub_division = c("ACSR - greased",
"ACSR - non-greased",
"AAAC",
"Cad Cu",
"Cu",
"Other")
. See page 103, table 20 in CNAIM (2017).
String. Specify if the asset is located outdoor or indoor.
A setting of "Outdoor" means the asset is
located in an outside environment,
and a setting of "Indoor" means the asset is located in an
indoor environment. A setting of "Default" will result
in either an indoor or an outdoor environment setting that depends
on the specification of asset_type. See page 107-108,
table 25A in CNAIM (2017) for default environments.
Numeric. Specify the altitude location for
the asset measured in meters from sea level.altitude_m
is used to derive the altitude factor. See page 107,
table 23 in CNAIM (2017). A setting of "Default"
will set the altitude factor to 1 independent of asset_type.
Numeric. Specify the distance from the
coast measured in kilometers. distance_from_coast_km is used
to derive the distance from coast factor See page 106,
table 22 in CNAIM (2017). A setting of "Default" will set the
distance from coast factor to 1 independent of asset_type.
Integer.
Specify the corrosion index category, 1-5.
corrosion_category_index is used to derive the corrosion
category factor. See page 107, table 24 in CNAIM (2017).
A setting of "Default" will set the corrosion category factor
to 1 independent of asset_type.
Numeric. The current age in years of the conductor.
String. Conductor sampling. Options:
conductor_samp = c("Low","Medium/Normal","High","Default").
See page 146-147, table 192 and 194 in CNAIM (2017).
String. Corrosion monitoring survey. Options:
corr_mon_survey = c("Low","Medium/Normal","High","Default").
See page 146-147, table 193 and 195 in CNAIM (2017).
String. Visual condition. Options:
visual_cond = c("As New","Normal Wear","Some Deterioration",
"Substantial Deterioration", "Default").
See page 131-132, table 127 and 129 in CNAIM (2017).
Integer. Number of midspan joints on the conductor. A span includes all conductors in that span. See page 131-132, table 128 and 130 in CNAIM (2017).
Numeric. reliability_factor
shall have a value between 0.6 and 1.5. A setting of "Default"
sets the reliability_factor to 1.
See section 6.14 on page 69 in CNAIM (2017).
Numeric. The last year of simulating probability of failure. Default is 100.
Numeric. Current probability of failure per annum per kilometer.
# NOT RUN {
# Future annual probability of failure for 66kV OHL (Tower Line) Conductor
pof_future_ohl_cond_132_66_33kv(
ohl_conductor = "66kV OHL (Tower Line) Conductor",
sub_division = "Cu",
placement = "Default",
altitude_m = "Default",
distance_from_coast_km = "Default",
corrosion_category_index = "Default",
age = 10,
conductor_samp = "Default",
corr_mon_survey = "Default",
visual_cond = "Default",
midspan_joints = "Default",
reliability_factor = "Default",
simulation_end_year = 100)
# }
Run the code above in your browser using DataLab