# rm.boot

0th

Percentile

##### Bootstrap Repeated Measurements Model

For a dataset containing a time variable, a scalar response variable, and an optional subject identification variable, obtains least squares estimates of the coefficients of a restricted cubic spline function or a linear regression in time after adjusting for subject effects through the use of subject dummy variables. Then the fit is bootstrapped B times, either by treating time and subject ID as fixed (i.e., conditioning the analysis on them) or as random variables. For the former, the residuals from the original model fit are used as the basis of the bootstrap distribution. For the latter, samples are taken jointly from the time, subject ID, and response vectors to obtain unconditional distributions.

If a subject id variable is given, the bootstrap sampling will be based on samples with replacement from subjects rather than from individual data points. In other words, either none or all of a given subject's data will appear in a bootstrap sample. This cluster sampling takes into account any correlation structure that might exist within subjects, so that confidence limits are corrected for within-subject correlation. Assuming that ordinary least squares estimates, which ignore the correlation structure, are consistent (which is almost always true) and efficient (which would not be true for certain correlation structures or for datasets in which the number of observation times vary greatly from subject to subject), the resulting analysis will be a robust, efficient repeated measures analysis for the one-sample problem.

Predicted values of the fitted models are evaluated by default at a grid of 100 equally spaced time points ranging from the minimum to maximum observed time points. Predictions are for the average subject effect. Pointwise confidence intervals are optionally computed separately for each of the points on the time grid. However, simultaneous confidence regions that control the level of confidence for the entire regression curve lying within a band are often more appropriate, as they allow the analyst to draw conclusions about nuances in the mean time response profile that were not stated apriori. The method of Tibshirani (1997) is used to easily obtain simultaneous confidence sets for the set of coefficients of the spline or linear regression function as well as the average intercept parameter (over subjects). Here one computes the objective criterion (here both the -2 log likelihood evaluated at the bootstrap estimate of beta but with respect to the original design matrix and response vector, and the sum of squared errors in predicting the original response vector) for the original fit as well as for all of the bootstrap fits. The confidence set of the regression coefficients is the set of all coefficients that are associated with objective function values that are less than or equal to say the 0.95 quantile of the vector of $\code{B} + 1$ objective function values. For the coefficients satisfying this condition, predicted curves are computed at the time grid, and minima and maxima of these curves are computed separately at each time point toderive the final simultaneous confidence band.

By default, the log likelihoods that are computed for obtaining the simultaneous confidence band assume independence within subject. This will cause problems unless such log likelihoods have very high rank correlation with the log likelihood allowing for dependence. To allow for correlation or to estimate the correlation function, see the cor.pattern argument below.

Keywords
multivariate, hplot, regression, htest
##### Usage
rm.boot(time, y, id=seq(along=time), subset,
plot.individual=FALSE,
bootstrap.type=c('x fixed','x random'),
nk=6, knots, B=500, smoother=supsmu,
xlab, xlim, ylim=range(y),
times=seq(min(time), max(time), length=100),
absorb.subject.effects=FALSE,
rho=0, cor.pattern=c('independent','estimate'), ncor=10000,
…)
# S3 method for rm.boot
plot(x, obj2, conf.int=.95,
xlab=x$xlab, ylab=x$ylab,
xlim, ylim=xylim, individual.boot=FALSE, pointwise.band=FALSE, curves.in.simultaneous.band=FALSE, col.pointwise.band=2, objective=c('-2 log L','sse','dep -2 log L'), add=FALSE, ncurves, multi=FALSE, multi.method=c('color','density'), multi.conf =c(.05,.1,.2,.3,.4,.5,.6,.7,.8,.9,.95,.99), multi.density=c( -1,90,80,70,60,50,40,30,20,10, 7, 4), multi.col =c( 1, 8,20, 5, 2, 7,15,13,10,11, 9, 14), subtitles=TRUE, …) ##### Arguments time numeric time vector y continuous numeric response vector of length the same as time. Subjects having multiple measurements have the measurements strung out. x an object returned from rm.boot id subject ID variable. If omitted, it is assumed that each time-response pair is measured on a different subject. subset subset of observations to process if not all the data plot.individual set to TRUE to plot nonparametrically smoothed time-response curves for each subject bootstrap.type specifies whether to treat the time and subject ID variables as fixed or random nk number of knots in the restricted cubic spline function fit. The number of knots may be 0 (denoting linear regression) or an integer greater than 2 in which k knots results in $\var{k} - 1$ regression coefficients excluding the intercept. The default is 6 knots. knots vector of knot locations. May be specified if nk is omitted. B number of bootstrap repetitions. Default is 500. smoother a smoothing function that is used if plot.individual=TRUE. Default is supsmu. xlab label for x-axis. Default is "units" attribute of the original time variable, or "Time" if no such attribute was defined using the units function. xlim specifies x-axis plotting limits. Default is to use range of times specified to rm.boot. ylim for rm.boot this is a vector of y-axis limits used if plot.individual=TRUE. It is also passed along for later use by plot.rm.boot. For plot.rm.boot, ylim can be specified, to override the value stored in the object stored by rm.boot. The default is the actual range of y in the input data. times a sequence of times at which to evaluated fitted values and confidence limits. Default is 100 equally spaced points in the observed range of time. absorb.subject.effects If TRUE, adjusts the response vector y before re-sampling so that the subject-specific effects in the initial model fit are all zero. Then in re-sampling, subject effects are not used in the models. This will downplay one of the sources of variation. This option is used mainly for checking for consistency of results, as the re-sampling analyses are simpler when absort.subject.effects=TRUE. rho The log-likelihood function that is used as the basis of simultaneous confidence bands assumes normality with independence within subject. To check the robustness of this assumption, if rho is not zero, the log-likelihood under multivariate normality within subject, with constant correlation rho between any two time points, is also computed. If the two log-likelihoods have the same ranks across re-samples, alllowing the correlation structure does not matter. The agreement in ranks is quantified using the Spearman rank correlation coefficient. The plot method allows the non-zero intra-subject correlation log-likelihood to be used in deriving the simultaneous confidence band. Note that this approach does assume homoscedasticity. cor.pattern More generally than using an equal-correlation structure, you can specify a function of two time vectors that generates as many correlations as the length of these vectors. For example, cor.pattern=function(time1,time2) 0.2^(abs(time1-time2)/10) would specify a dampening serial correlation pattern. cor.pattern can also be a list containing vectors x (a vector of absolute time differences) and y (a corresponding vector of correlations). To estimate the correlation function as a function of absolute time differences within subjects, specify cor.pattern="estimate". The products of all possible pairs of residuals (or at least up to ncor of them) within subjects will be related to the absolute time difference. The correlation function is estimated by computing the sample mean of the products of standardized residuals, stratified by absolute time difference. The correlation for a zero time difference is set to 1 regardless of the lowess estimate. NOTE: This approach fails in the presence of large subject effects; correcting for such effects removes too much of the correlation structure in the residuals. ncor the maximum number of pairs of time values used in estimating the correlation function if cor.pattern="estimate" other arguments to pass to smoother if plot.individual=TRUE obj2 a second object created by rm.boot that can also be passed to plot.rm.boot. This is used for two-sample problems for which the time profiles are allowed to differ between the two groups. The bootstrapped predicted y values for the second fit are subtracted from the fitted values for the first fit so that the predicted mean response for group 1 minus the predicted mean response for group 2 is what is plotted. The confidence bands that are plotted are also for this difference. For the simultaneous confidence band, the objective criterion is taken to be the sum of the objective criteria (-2 log L or sum of squared errors) for the separate fits for the two groups. The times vectors must have been identical for both calls to rm.boot, although NAs can be inserted by the user of one or both of the time vectors in the rm.boot objects so as to suppress certain sections of the difference curve from being plotted. conf.int the confidence level to use in constructing simultaneous, and optionally pointwise, bands. Default is 0.95. ylab label for y-axis. Default is the "label" attribute of the original y variable, or "y" if no label was assigned to y (using the label function, for example). individual.boot set to TRUE to plot the first 100 bootstrap regression fits pointwise.band set to TRUE to draw a pointwise confidence band in addition to the simultaneous band curves.in.simultaneous.band set to TRUE to draw all bootstrap regression fits that had a sum of squared errors (obtained by predicting the original y vector from the original time vector and id vector) that was less that or equal to the conf.int quantile of all bootstrapped models (plus the original model). This will show how the point by point max and min were computed to form the simultaneous confidence band. col.pointwise.band color for the pointwise confidence band. Default is 2, which defaults to red for default Windows S-PLUS setups. objective the default is to use the -2 times log of the Gaussian likelihood for computing the simultaneous confidence region. If neither cor.pattern nor rho was specified to rm.boot, the independent homoscedastic Gaussian likelihood is used. Otherwise the dependent homoscedastic likelihood is used according to the specified or estimated correlation pattern. Specify objective="sse" to instead use the sum of squared errors. add set to TRUE to add curves to an existing plot. If you do this, titles and subtitles are omitted. ncurves when using individual.boot=TRUE or curves.in.simultaneous.band=TRUE, you can plot a random sample of ncurves of the fitted curves instead of plotting up to B of them. multi set to TRUE to draw multiple simultaneous confidence bands shaded with different colors. Confidence levels vary over the values in the multi.conf vector. multi.method specifies the method of shading when multi=TRUE. Default is to use colors, with the default colors chosen so that when the graph is printed under S-Plus for Windows 4.0 to an HP LaserJet printer, the confidence regions are naturally ordered by darkness of gray-scale. Regions closer to the point estimates (i.e., the center) are darker. Specify multi.method="density" to instead use densities of lines drawn per inch in the confidence regions, with all regions drawn with the default color. The polygon function is used to shade the regions. multi.conf vector of confidence levels, in ascending order. Default is to use 12 confidence levels ranging from 0.05 to 0.99. multi.density vector of densities in lines per inch corresponding to multi.conf. As is the convention in the polygon function, a density of -1 indicates a solid region. multi.col vector of colors corresponding to multi.conf. See multi.method for rationale. subtitles set to FALSE to suppress drawing subtitles for the plot ##### Details Observations having missing time or y are excluded from the analysis. As most repeated measurement studies consider the times as design points, the fixed covariable case is the default. Bootstrapping the residuals from the initial fit assumes that the model is correctly specified. Even if the covariables are fixed, doing an unconditional bootstrap is still appropriate, and for large sample sizes unconditional confidence intervals are only slightly wider than conditional ones. For moderate to small sample sizes, the bootstrap.type="x random" method can be fairly conservative. If not all subjects have the same number of observations (after deleting observations containing missing values) and if bootstrap.type="x fixed", bootstrapped residual vectors may have a length m that is different from the number of original observations n. If $\var{m} > \var{n}$ for a bootstrap repetition, the first n elements of the randomly drawn residuals are used. If $\var{m} < \var{n}$, the residual vector is appended with a random sample with replacement of length $\var{n} - \var{m}$ from itself. A warning message is issued if this happens. If the number of time points per subject varies, the bootstrap results for bootstrap.type="x fixed" can still be invalid, as this method assumes that a vector (over subjects) of all residuals can be added to the original yhats, and varying number of points will cause mis-alignment. For bootstrap.type="x random" in the presence of significant subject effects, the analysis is approximate as the subjects used in any one bootstrap fit will not be the entire list of subjects. The average (over subjects used in the bootstrap sample) intercept is used from that bootstrap sample as a predictor of average subject effects in the overall sample. Once the bootstrap coefficient matrix is stored by rm.boot, plot.rm.boot can be run multiple times with different options (e.g, different confidence levels). See bootcov in the rms library for a general approach to handling repeated measurement data for ordinary linear models, binary and ordinal models, and survival models, using the unconditional bootstrap. bootcov does not handle bootstrapping residuals. ##### Value an object of class rm.boot is returned by rm.boot. The principal object stored in the returned object is a matrix of regression coefficients for the original fit and all of the bootstrap repetitions (object Coef), along with vectors of the corresponding -2 log likelihoods are sums of squared errors. The original fit object from lm.fit.qr is stored in fit. For this fit, a cell means model is used for the id effects. plot.rm.boot returns a list containing the vector of times used for plotting along with the overall fitted values, lower and upper simultaneous confidence limits, and optionally the pointwise confidence limits. ##### References Feng Z, McLerran D, Grizzle J (1996): A comparison of statistical methods for clustered data analysis with Gaussian error. Stat in Med 15:1793--1806. Tibshirani R, Knight K (1997):Model search and inference by bootstrap "bumping". Technical Report, Department of Statistics, University of Toronto. http://www-stat.stanford.edu/~tibs. Presented at the Joint Statistical Meetings, Chicago, August 1996. Efron B, Tibshirani R (1993): An Introduction to the Bootstrap. New York: Chapman and Hall. Diggle PJ, Verbyla AP (1998): Nonparametric estimation of covariance structure in logitudinal data. Biometrics 54:401--415. Chapman IM, Hartman ML, et al (1997): Effect of aging on the sensitivity of growth hormone secretion to insulin-like growth factor-I negative feedback. J Clin Endocrinol Metab 82:2996--3004. Li Y, Wang YG (2008): Smooth bootstrap methods for analysis of longitudinal data. Stat in Med 27:937-953. (potential improvements to cluster bootstrap; not implemented here) ##### See Also rcspline.eval, lm, lowess, supsmu, bootcov, units, label, polygon, reShape ##### Aliases • rm.boot • plot.rm.boot ##### Examples # NOT RUN { # Generate multivariate normal responses with equal correlations (.7) # within subjects and no correlation between subjects # Simulate realizations from a piecewise linear population time-response # profile with large subject effects, and fit using a 6-knot spline # Estimate the correlation structure from the residuals, as a function # of the absolute time difference # Function to generate n p-variate normal variates with mean vector u and # covariance matrix S # Slight modification of function written by Bill Venables # See also the built-in function rmvnorm mvrnorm <- function(n, p = 1, u = rep(0, p), S = diag(p)) { Z <- matrix(rnorm(n * p), p, n) t(u + t(chol(S)) %*% Z) } n <- 20 # Number of subjects sub <- .5*(1:n) # Subject effects # Specify functional form for time trend and compute non-stochastic component times <- seq(0, 1, by=.1) g <- function(times) 5*pmax(abs(times-.5),.3) ey <- g(times) # Generate multivariate normal errors for 20 subjects at 11 times # Assume equal correlations of rho=.7, independent subjects nt <- length(times) rho <- .7 set.seed(19) errors <- mvrnorm(n, p=nt, S=diag(rep(1-rho,nt))+rho) # Note: first random number seed used gave rise to mean(errors)=0.24! # Add E[Y], error components, and subject effects y <- matrix(rep(ey,n), ncol=nt, byrow=TRUE) + errors + matrix(rep(sub,nt), ncol=nt) # String out data into long vectors for times, responses, and subject ID y <- as.vector(t(y)) times <- rep(times, n) id <- sort(rep(1:n, nt)) # Show lowess estimates of time profiles for individual subjects f <- rm.boot(times, y, id, plot.individual=TRUE, B=25, cor.pattern='estimate', smoother=lowess, bootstrap.type='x fixed', nk=6) # In practice use B=400 or 500 # This will compute a dependent-structure log-likelihood in addition # to one assuming independence. By default, the dep. structure # objective will be used by the plot method (could have specified rho=.7) # NOTE: Estimating the correlation pattern from the residual does not # work in cases such as this one where there are large subject effects # Plot fits for a random sample of 10 of the 25 bootstrap fits plot(f, individual.boot=TRUE, ncurves=10, ylim=c(6,8.5)) # Plot pointwise and simultaneous confidence regions plot(f, pointwise.band=TRUE, col.pointwise=1, ylim=c(6,8.5)) # Plot population response curve at average subject effect ts <- seq(0, 1, length=100) lines(ts, g(ts)+mean(sub), lwd=3) # } # NOT RUN { # # Handle a 2-sample problem in which curves are fitted # separately for males and females and we wish to estimate the # difference in the time-response curves for the two sexes. # The objective criterion will be taken by plot.rm.boot as the # total of the two sums of squared errors for the two models # knots <- rcspline.eval(c(time.f,time.m), nk=6, knots.only=TRUE) # Use same knots for both sexes, and use a times vector that # uses a range of times that is included in the measurement # times for both sexes # tm <- seq(max(min(time.f),min(time.m)), min(max(time.f),max(time.m)),length=100) f.female <- rm.boot(time.f, bp.f, id.f, knots=knots, times=tm) f.male <- rm.boot(time.m, bp.m, id.m, knots=knots, times=tm) plot(f.female) plot(f.male) # The following plots female minus male response, with # a sequence of shaded confidence band for the difference plot(f.female,f.male,multi=TRUE) # Do 1000 simulated analyses to check simultaneous coverage # probability. Use a null regression model with Gaussian errors n.per.pt <- 30 n.pt <- 10 null.in.region <- 0 for(i in 1:1000) { y <- rnorm(n.pt*n.per.pt) time <- rep(1:n.per.pt, n.pt) # Add the following line and add ,id=id to rm.boot to use clustering # id <- sort(rep(1:n.pt, n.per.pt)) # Because we are ignoring patient id, this simulation is effectively # using 1 point from each of 300 patients, with times 1,2,3,,,30 f <- rm.boot(time, y, B=500, nk=5, bootstrap.type='x fixed') g <- plot(f, ylim=c(-1,1), pointwise=FALSE) null.in.region <- null.in.region + all(glower<=0 & g\$upper>=0)
prn(c(i=i,null.in.region=null.in.region))
}

# Simulation Results: 905/1000 simultaneous confidence bands
# fully contained the horizontal line at zero
# }

Documentation reproduced from package Hmisc, version 4.4-0, License: GPL (>= 2)

### Community examples

Looks like there are no examples yet.