Create the list of model parameters
set_paramLWFB90(...)A list with model parameters for use as param_b90-argument in
run_LWFB90.
Named arguments to be included in return value.
| Name | Description | Unit | Group |
| czr | Ratio of roughness length to mean height for smooth closed canopies for heights greater than HR when LAI>LPC. Default: 0.05 | - | Canopy |
| czs | Ratio of roughness length to mean height for smooth closed canopies for heights less than HS when LAI>LPC. Default: 0.13 | m | Canopy |
| hr | Smallest height to which CZR applies. Default: 10 | m | Canopy |
| hs | Largest height to which CZS applies. Default: 1 | m | Canopy |
| lpc | Minimum leaf area index defining a closed canopy. Default: 4 | - | Canopy |
| lwidth | Average leaf width. Default: 0.1 | m | Canopy |
| nn | Eddy diffusivity extinction coefficient within canopy. Default: 2.5 | - | Canopy |
| rhotp | Ratio of total leaf area to projected area. Default: 2 | - | Canopy |
| zminh | Reference height for weather data above the canopy top height. Default: 2 | m | Canopy |
| dslope | Slope for downslope-flow. Default: 0 | deg | Flow |
| bypar | Switch to allow (1) or prevent (0) bypass flow in deeper layers. Default: 0 | - | Flow |
| drain | Switch for lower boundary condition to be free drainage (1) or no flow (0). Default: 1 | - | Flow |
| slopelen | Slope length for downslope-flow. Default: 200 | m | Flow |
| gsc | Rate constant for ground water discharge (remember that a first order groundwater reservoir is placed below the soil profile), for value 0 there is no discharge. Default: 0 | d-1 | Flow |
| gsp | Seepage fraction of groundwater discharge. Default: | - | Flow |
| ilayer | Number of layers from top to which infiltration is distributed. Default: 0 | - | Flow |
| imperv | Fraction of area which has an impermeable surface (like roads). Default: 0 | - | Flow |
| infexp | Shape parameter for distribution of infiltration in first ILayer, for value 0 infiltration is in top layer only. Default: 0 | - | Flow |
| qffc | Quickflow fraction of infiltrating water at field capacity, for value 0 there is no quickflow (bypass or surface) unless soil profile surface becomes saturated. Default: 0 | - | Flow |
| qfpar | Quickflow shape parameter. Default: 1 | - | Flow |
| qlayer | Number of layers which are considered for generation of surface or source area flow. Default: 0 | - | Flow |
| water_table_depth | Depth of the water table for a constant head boundary. -9999 means gravitational flow boundary. Default: -9999 | m | Flow |
| gwatini | Initial value of groundwater storage. Default: 0 | mm | Initial |
| snowini | Initial value of water content of snow pack. Default: 0 | mm | Initial |
| snowlqini | Initial value of liquid water content of snow pack. Default: 0 | mm | Initial |
| snowccini | Initial value of cold content of snow pack (positive). Default: 0 | MJ m-2 | Initial |
| intrainini | Initial value of intercepted rain. Default: 0 | mm | Initial |
| intsnowini | Initial value of intercepted snow. Default: 0 | - | Initial |
| psiini | Initial pressure head of soil layers. May have the same length as row.names(soil). Default: -6.3 | kPa | Initial |
| cintrl | Maximum interception storage of rain per unit LAI. Default: 0.15 | mm | Interception |
| cintrs | Maximum interception storage of rain per unit SAI. Default: 0.15 | mm | Interception |
| cintsl | Maximum interception storage of snow per unit LAI. Default: 0.6 | mm | Interception |
| cintss | Maximum interception storage of snow per unit SAI. Default: 0.6 | mm | Interception |
| frintlai | Intercepted fraction of rain per unit LAI. Default: 0.06 | - | Interception |
| frintsai | Intercepted fraction of rain per unit SAI. Default: 0.06 | - | Interception |
| fsintlai | Intercepted fraction of snow per unit LAI. Default: 0.04 | - | Interception |
| fsintsai | Intercepted fraction of snow per unit SAI. Default: 0.04 | - | Interception |
| pdur | Average duration of precipitation events for each month of the year. Default: rep(4,12) | hours | Interception |
| alb | Albedo of soil/vegetation surface without snow. Default: 0.2 | - | Meteo |
| albsn | Albedo of soil/vegetation surface with snow. Default: 0.5 | - | Meteo |
| c1 | Intercept of relation of solar radiation to sunshine duration. Default: 0.25 | - | Meteo |
| c2 | Intercept of relation of solar radiation to sunshine duration. Default: 0.5 | - | Meteo |
| c3 | Constant between 0 and 1 that determines the cloud correction to net longwave radiation from sunshine duration. Default: 0.2 | - | Meteo |
| fetch | Fetch upwind of the weather station at which wind speed was measured. Default: 5000 | m | Meteo |
| ksnvp | Correction factor for snow evaporation. Default: 0.3 | - | Meteo |
| wndrat | Average ratio of nighttime to daytime wind speed. Default: 0.3 | - | Meteo |
| z0s | Surface roughness of snow cover. Default: 0.001 | m | Meteo |
| z0w | Roughness length at the weather station at which wind speed was measured. Default: 0.005 (Grass) | m | Meteo |
| coords_x | Longitude value (decimal degrees) of the simulation location (has no effect on simulation results). Default: 9.91 | m | Meteo |
| coords_y | Latitude value (decimal degrees) of the simulation location. Default: 51.54 | m | Meteo |
| zw | Height at which wind speed was measured. Default: 2 | m | Meteo |
| eslope | Slope for evapotranspiration and snowmelt calculation. Default: 0 | deg | Meteo |
| aspect | Mean exposition of soil surface at soil profile (north: 0, east: 90, south: 180, west: 270). Default: 0 | deg | Meteo |
| obsheight | Mean height of obstacles on soil surface (grass, furrows etc.), used to calculate soil surface roughness. Default: 0.025 | m | Meteo |
| prec_corr_statexp | Station exposure situation of prec measurements (passed to correct_prec Default: 'mg' | Meteo | |
| dpsimax | Maximum potential difference considered equal. Default: 5e-04 | kPa | Numerical |
| dswmax | Maximum change allowed in SWATI. Default: 0.05 | percent of SWATMX | Numerical |
| dtimax | Maximum iteration time step. Default: 0.5 | d | Numerical |
| budburst_species | Name of tree species for estimating budburst doy using Menzel-model (passed to vegperiod) Default: 'Fagus sylvatica' | - | Plant |
| budburstdoy | Budburst day of year - passed to make_seasLAI. Default: 121 | doy | Plant |
| emergedur | Leaf growth duration until maxlai is reached.. Default: 28 | d | Plant |
| height | Plant height. Default: 25 | m | Plant |
| height_ini | Initial plant height at the beginning of the simulation. Used when options_b90$standprop_interp = 'linear' (see approx_standprop). Default: 25 | m | Plant |
| leaffalldoy | Day of year when leaf fall begins - passed to make_seasLAI Default: 279 | doy | Plant |
| leaffalldur | Number of days until minimum lai is reached - passed to make_seasLAI Default: 58 | d | Plant |
| sai | Steam area index. Default: 1 | - | Plant |
| sai_ini | Initial stem area index at the beginning of the simulation. Used when options_b90$standprop_interp = 'linear' (see approx_standprop), Default: 1 | - | Plant |
| shp_leaffall | Shape parameter for leaf fall phase - passed to make_seasLAI Default: 0.3 | - | Plant |
| shp_budburst | Shape parameter for leaf growth phase - passed to make_seasLAI Default: 3 | - | Plant |
| shp_optdoy | Day of year when optimum value is reached - passed to make_seasLAI Default: 210 | doy | Plant |
| lai_doy | Day of year values for lai-interpolation - passed to make_seasLAI | doy | Plant |
| lai_frac | Fractional lai values for lai interpolation, corresponding to lai_doy - passed to make_seasLAI Default: 210 | doy | Plant |
| winlaifrac | Minimum LAI as a fraction of maxlai. Default: 0 | - | Plant |
| standprop_table | Data.frame with yearly values of vegetation properties with columns 'year','age', 'height', 'maxlai', 'sai', 'densef' | Plant | |
| cs | Ratio of projected stem area index to canopy height. Default: 0.035 | m-1 | Plant |
| densef | Density factor for MaxLAI, CS, RtLen, RPlant, not <.001, 1 for typical stand. Default: 1 | - | Plant |
| densef_ini | Initial density factor at the beginning of the simulation. Used when options_b90$standprop_interp = 'linear' (see approx_standprop). Default: 1 | - | Plant |
| maxlai | Maximum projected leaf area index - passed to make_seasLAI Default: 5 | - | Plant |
| radex | Extinction coefficient for solar radiation and net radiation in the canopy. Default: 0.5 | - | Potential Transpiration |
| cvpd | Vapour pressure deficit at which leaf conductance is halved. Default: 2 | kPa | Potential Transpiration |
| glmax | Maximum leaf vapour conductance when stomata are fully open. Default: 0.0053 | m s-1 | Potential Transpiration |
| glmin | Minimum leaf vapour conductance when stomata are closed. Default: 0.0003 | m s-1 | Potential Transpiration |
| r5 | Solar radiation level at which leaf conductance is half of its value at RM. Default: 100 | W m-2 | Potential Transpiration |
| rm | Nominal maximum solar shortwave radiation possible on a leaf (to reach glmax). Default: 1000 | W m-2 | Potential Transpiration |
| t1 | Lower suboptimal temperature threshold for stomata opening - temperature relation. Default: 10 | deg C | Potential Transpiration |
| t2 | Upper suboptimal temperature threshold for stomata opening - temperature relation. Default: 30 | deg C | Potential Transpiration |
| th | Upper temperature threshold for stomata closure. Default: 40 | deg C | Potential Transpiration |
| tl | Lower temperature threshold for stomata closure. Default: 0 | deg C | Potential Transpiration |
| betaroot | Shape parameter for rootlength density depth distribution. Default: 0.97 | - | Roots |
| maxrootdepth | Maximum root depth (positive downward) - passed to make_rootden. Default: -1.5 | m | Roots |
| rootden_table | Data.frame of relative root density depth distribution with columns 'depth' and 'rootden' | Roots | |
| rstemp | Base temperature for snow-rain transition. Default: -0.5 | deg C | Snow |
| ccfac | Cold content factor. Default: 0.3 | MJ m-2 d-1 K-1 | Snow |
| grdmlt | Rate of groundmelt of snowpack. Default: 0.35 | mm d-1 | Snow |
| laimlt | Parameter for snowmelt dependence on LAI. Default: 0.2 | - | Snow |
| maxlqf | Maximum liquid water fraction of Snow. Default: 0.05 | - | Snow |
| melfac | Degree day melt factor for open. Default: 1.5 | MJ m-2 d-1 K-1 | Snow |
| saimlt | Parameter for snowmelt dependence on SAI. Default: 0.5 | - | Snow |
| snoden | Snow density. Default: 0.3 | mm mm-1 | Snow |
| rssa | Soil evaporation resistance at field capacity. Default: 100 | s m-1 | Soilevap |
| rssb | Exponent in relation of RSS to water potential. Default: 1 | - | Soilevap |
| soil_nodes | Data.frame with soil nodes discretization passed to LWF-Brook90 | - | Soil |
| soil_materials | Data.frame with soil materials (hydrualic parameters) passed to LWF-Brook90 | - | Soil |
| age_ini | Age of stand (for root development). Default: 100 | a | Water supply |
| initrdep | Initial root depth. Default: 0.25 | m | Water supply |
| initrlen | Initial water-absorbing root length per unit area. Default: 12 | m/m-2 | Water supply |
| rgroper | Period of net root growth. A value of 0 prevents root growth. Default: 0 | a | Water supply |
| rgrorate | Vertical root growth rate. Default: 0.03 | m a-1 | Water supply |
| fxylem | Fraction of internal plant resistance to water flow that is in the Xylem. Default: 0.5 | - | Water supply |
| maxrlen | Total length of fine roots per unit ground area. Default: 3000 | m m-2 | Water supply |
| mxkpl | Maximum internal conductivity for water flow through the plants. Default: 8 | mm d-1 MPa-1 | Water supply |
| nooutf | Switch that prevents outflow from the root to the soil when the soil is dry. Default: 1 | - | Water supply |
| psicr | Critical leaf water potential at which stomates close. Default: -2 | MPa | Water supply |
| rrad | Average radius of the fine or water-absorbing roots. Default: 0.35 | mm | Water supply |
# Default parameter
parms <- set_paramLWFB90()
# Include specific parameters
parms_maxlai <- set_paramLWFB90(maxlai = c(4,6,5), height =20)
Run the code above in your browser using DataLab