Luminescence (version 0.3.1)

ExampleData.XSYG: Example data for a SAR OSL measurement and a TL spectrum using a lexsyg reader

Description

Example data from a SAR OSL measurement and a TL spectrum for package Luminescence imported from a Freiberg Instruments XSYG file using the function readXSYG2R.

Usage

ExampleData.XSYG

format

OSL.SARMeasurement: SAR OSL measurement data

The data contain two elements: (a) $Sequence.Header is a data.frame with metadata from the measurement,(b) Sequence.Object contains an RLum.Analysis object for further analysis. TL.Spectrum: TL spectrum data

RLum.Data.Spectrum object for further analysis. The spectrum was cleaned from cosmic-rays using the function, apply_CosmicRayRemoval. Note that no quantum efficiency calibration was performed.

source

OSL.SARMeasurement

ll{

Lab: Luminescence Laboratory Giessen Lab-Code: no code Location: not specified Material: Coarse grain quartz on steel cups on lexsyg research reader Reference: unpublished }

TL.Spectrum

ll{

Lab: Luminescence Laboratory Giessen Lab-Code: BT753 Location: Dolni Vestonice/Czech Republic Material: Fine grain polymineral on steel cups on lexsyg rearch reader Reference: Fuchs et al., 2013 Spectrum: Integration time 19 s, channel time 20 s Heating: 1 K/s, up to 500 deg. C }

Version

0.1

References

Unpublished data measured to serve as example data for that package. Location origin of sample BT753 is given here:

Fuchs, M., Kreutzer, S., Rousseau, D.D., Antoine, P., Hatte, C., Lagroix, F., Moine, O., Gauthier, C., Svoboda, J., Lisa, L., 2013. The loess sequence of Dolni Vestonice, Czech Republic: A new OSL-based chronology of the Last Climatic Cycle. Boreas, 42, 664--677.

See Also

readXSYG2R, RLum.Analysis, RLum.Data.Spectrum, plot_RLum, plot_RLum.Analysis, plot_RLum.Data.Spectrum

Examples

##show data
data(ExampleData.XSYG, envir = environment())

## =========================================
##(1) OSL.SARMeasurement 
OSL.SARMeasurement

##show $Sequence.Object
OSL.SARMeasurement$Sequence.Object

##grep OSL curves and plot the first curve
OSLcurve <- get_RLum.Analysis(OSL.SARMeasurement$Sequence.Object, 
recordType="OSL")[[1]]
plot_RLum(OSLcurve)

## =========================================
##(2) TL.Spectrum
TL.Spectrum

##plot simple spectrum (2D)
plot_RLum.Data.Spectrum(TL.Spectrum, 
                        plot.type="contour", 
                        xlim = c(310,750), 
                        ylim = c(0,300),
                        bin.rows=10, 
                        bin.cols = 1)
                        
##plot 3d spectrum (uncomment for usage)
# plot_RLum.Data.Spectrum(TL.Spectrum, plot.type="persp", 
# xlim = c(310,750), ylim = c(0,300), bin.rows=10, 
# bin.cols = 1)