ANSI/AAMI EC13 Test Waveforms, 3a and 3b
ANSI/AAMI EC13 Test Waveforms 3a and 3b, as obtained from the PhysioBank database.
The following text is reproduced (abridged) from PhysioBank, page http://www.physionet.org/physiobank/database/aami-ec13/. Other recordings belong to the dataset and can be obtained from the same page.
The files in this set can be used for testing a variety of devices that monitor the electrocardiogram. The recordings include both synthetic and real waveforms. For details on these test waveforms and how to use them, please refer to section 220.127.116.11, paragraphs (e) and (g) in the reference below. Each recording contains one ECG signal sampled at 720 Hz with 12-bit resolution.
Timestamps in the datasets have been re-created at the indicated frequency of 720 Hz, whereas the original timestamps in ms (at least in text format) only had three decimal digits' precision, and were therefore affected by substantial jittering.
> str(aami3a) Time-Series [1:43081] from 0 to 59.8: 0.185 0.185 0.169 0.185 0.185 0.185 0.185 0.185 0.185 0.2 ... > str(aami3b) Time-Series [1:43142] from 0 to 59.9: 0.192 0.192 0.192 0.192 0.192 0.2 0.2 0.192 0.2 0.2 ...
Cardiac monitors, heart rate meters, and alarms [American National Standard (ANSI/AAMI EC13:2002)]. Arlington, VA: Association for the Advancement of Medical Instrumentation, 2002
Goldberger AL, Amaral LAN, Glass L, Hausdorff JM, Ivanov PCh, Mark RG, Mietus JE, Moody GB, Peng CK, Stanley HE. PhysioBank, PhysioToolkit, and PhysioNet: Components of a New Research Resource for Complex Physiologic Signals. Circulation 101(23):e215-e220 [Circulation Electronic Pages; http://circ.ahajournals.org/cgi/content/full/101/23/e215]; 2000 (June 13).
data(aami3a); data(aami3b); ## Plot both as a multivariate TS object ## only extract the first 10 seconds plot( main="ECG (mV)", window( cbind(aami3a,aami3b) ,end=10) )