# g.fun

0th

Percentile

##### Calculates the invariants g2 and g3

Calculates the invariants g2 and g3 using any of a number of methods

Keywords
math
##### Usage
g.fun(b, ...)
g2.fun(b, use.first=TRUE, ...)
g3.fun(b, use.first=TRUE, ...)
g2.fun.lambert(b, nmax=50, tol=1e-10, strict=TRUE)
g3.fun.lambert(b, nmax=50, tol=1e-10, strict=TRUE)
g2.fun.direct(b, nmax=50, tol=1e-10)
g3.fun.direct(b, nmax=50, tol=1e-10)
g2.fun.fixed(b, nmax=50, tol=1e-10, give=FALSE)
g3.fun.fixed(b, nmax=50, tol=1e-10, give=FALSE)
g2.fun.vectorized(b, nmax=50, tol=1e-10, give=FALSE)
g3.fun.vectorized(b, nmax=50, tol=1e-10, give=FALSE)
##### Arguments
b

Half periods. NB: the arguments are the half periods as per AMS55! In these functions, argument b is interpreted as per p1.tau()

nmax

Maximum number of terms to sum. See details section for more discussion

tol

Numerical tolerance for stopping: summation stops when adding an additional term makes less

strict

Boolean, with default (where taken) TRUE meaning to stop() if convergence is not achieved in nmax terms. Setting to FALSE returns the partial sum and a warning.

give

Boolean, with default (where taken) TRUE meaning to return the partial sums. See examples section for an example of this argument in use

...

In functions g.fun(), g2.fun() and g3.fun(), extra arguments passed to theta1() and friends

use.first

In function g2.fun() and g3.fun(), Boolean with default TRUE meaning to use Wolfram's first formula (remember to cite this) and FALSE meaning to use the second

##### Details

Functions g2.fun() and g3.fun() use theta functions which converge very quickly. These functions are the best in most circumstances. The theta functions include a loop that continues to add terms until the partial sum is unaltered by addition of the next term. Note that summation continues until all elements of the argument are properly summed, so performance is limited by the single worst-case element.

The following functions are provided for interest only, although there is a remote possibility that some weird circumstances may exist in which they are faster than the theta function approach.

Functions g2.fun.divisor() and g3.fun.divisor() use Chandrasekharan's formula on page 83. This is generally slower than the theta function approach

Functions g2.fun.lambert() and g3.fun.lambert() use a Lambert series to accelerate Chandrasekharan's formula. In general, it is a little better than the divisor form.

Functions g2.fun.fixed() and g2.fun.fixed() also use Lambert series. These functions are vectorized in the sense that the function body uses only vector operations. These functions do not take a vector argument. They are called “fixed” because the number of terms used is fixed in advance (unlike g2.fun() and g3.fun()).

Functions g2.fun.vectorized() and g3.fun.vectorized() also use Lambert series. They are fully vectorized in that they take a vector of periods or period ratios, unlike the previous two functions. However, this can lead to loss of precision in some cases (specifically when the periods give rise to widely varying values of g2 and g3).

Functions g2.fun.direct() and g3.fun.direct() use a direct summation. These functions are absurdly slow. In general, the Lambert series functions converge much faster; and the “default” functions g2.fun() and g3.fun(), which use theta functions, converge faster still.

##### References

Mathematica website

##### Aliases
• g.fun
• g2.fun
• g3.fun
• g2.fun.lambert
• g3.fun.lambert
• g2.fun.direct
• g3.fun.direct
• g2.fun.fixed
• g3.fun.fixed
• g2.fun.divisor
• g3.fun.divisor
• g2.fun.vectorized
• g3.fun.vectorized
• e18.1.1
##### Examples
# NOT RUN {
g.fun(half.periods(g=c(8,4+1i)))  ## should be c(8,4+1i)

## Example 4, p664, LHS:
omega <- c(10,11i)
(g2 <- g2.fun(omega))
(g3 <- g3.fun(omega))
e1e2e3(Re(c(g2,g3)))

## Example 4, p664, RHS:
omega2 <- 10
omega2dash <- 11i
omega1 <- (omega2-omega2dash)/2   ## From figure 18.1, p630
(g2 <- g2.fun(c(omega1,omega2)))
(g3 <- g3.fun(c(omega1,omega2)))
e1e2e3(Re(c(g2,g3)))
# }

Documentation reproduced from package elliptic, version 1.4-0, License: GPL-2

### Community examples

Looks like there are no examples yet.