# scg

##### All-in-one Function for the SCG of Matrices and Graphs

This function handles all the steps involved in the Spectral Coarse Graining (SCG) of some matrices and graphs as described in the reference below.

- Keywords
- graphs

##### Usage

```
scg(X, ev, nt, groups = NULL, mtype = c("symmetric", "laplacian",
"stochastic"), algo = c("optimum", "interv_km", "interv", "exact_scg"),
norm = c("row", "col"), direction = c("default", "left", "right"),
evec = NULL, p = NULL, use.arpack = FALSE, maxiter = 300,
sparse = igraph_opt("sparsematrices"), output = c("default",
"matrix", "graph"), semproj = FALSE, epairs = FALSE,
stat.prob = FALSE)
```

##### Arguments

- X
The input graph or square matrix. Can be of class

`igraph`

,`matrix`

or`Matrix`

.- ev
A vector of positive integers giving the indexes of the eigenpairs to be preserved. For real eigenpairs, 1 designates the eigenvalue with largest algebraic value, 2 the one with second largest algebraic value, etc. In the complex case, it is the magnitude that matters.

- nt
A vector of positive integers of length one or equal to

`length(ev)`

. When`algo`

= “optimum”,`nt`

contains the number of groups used to partition each eigenvector separately. When`algo`

is equal to “interv\_km” or “interv”,`nt`

contains the number of intervals used to partition each eigenvector. The same partition size or number of intervals is used for each eigenvector if`nt`

is a single integer. When`algo`

= “exact\_cg” this parameter is ignored.- groups
A vector of

`nrow(X)`

or`vcount(X)`

integers labeling each group vertex in the partition. If this parameter is supplied most part of the function is bypassed.- mtype
Character scalar. The type of semi-projector to be used for the SCG. For now “symmetric”, “laplacian” and “stochastic” are available.

- algo
Character scalar. The algorithm used to solve the SCG problem. Possible values are “optimum”, “interv\_km”, “interv” and “exact\_scg”.

- norm
Character scalar. Either “row” or “col”. If set to “row” the rows of the Laplacian matrix sum up to zero and the rows of the stochastic matrix sum up to one; otherwise it is the columns.

- direction
Character scalar. When set to “right”, resp. “left”, the parameters

`ev`

and`evec`

refer to right, resp. left eigenvectors. When passed “default” it is the SCG described in the reference below that is applied (common usage). This argument is currently not implemented, and right eigenvectors are always used.- evec
A numeric matrix of (eigen)vectors to be preserved by the coarse graining (the vectors are to be stored column-wise in

`evec`

). If supplied, the eigenvectors should correspond to the indexes in`ev`

as no cross-check will be done.- p
A probability vector of length

`nrow(X)`

(or`vcount(X)`

).`p`

is the stationary probability distribution of a Markov chain when`mtype`

= “stochastic”. This parameter is ignored in all other cases.- use.arpack
Logical scalar. When set to

`TRUE`

uses the function`arpack`

to compute eigenpairs. This parameter should be set to`TRUE`

if one deals with large (over a few thousands) AND sparse graphs or matrices. This argument is not implemented currently and LAPACK is used for solving the eigenproblems.- maxiter
A positive integer giving the maximum number of iterations for the k-means algorithm when

`algo`

= “interv\_km”. This parameter is ignored in all other cases.- sparse
Logical scalar. Whether to return sparse matrices in the result, if matrices are requested.

- output
Character scalar. Set this parameter to “default” to retrieve a coarse-grained object of the same class as

`X`

.- semproj
Logical scalar. Set this parameter to

`TRUE`

to retrieve the semi-projectors of the SCG.- epairs
Logical scalar. Set this to

`TRUE`

to collect the eigenpairs computed by`scg`

.- stat.prob
Logical scalar. This is to collect the stationary probability

`p`

when dealing with stochastic matrices.

##### Details

Please see scg-method for an introduction.

In the following \(V\) is the matrix of eigenvectors for which the SCG is
solved. \(V\) is calculated from `X`

, if it is not given in the
`evec`

argument.

The algorithm “optimum” solves exactly the SCG problem for each
eigenvector in `V`

. The running time of this algorithm is \(O(\max
nt \cdot m^2)\) for the symmetric and laplacian matrix
problems (i.e. when `mtype`

is “symmetric” or
“laplacian”. It is \(O(m^3)\) for the stochastic problem. Here
\(m\) is the number of rows in `V`

. In all three cases, the memory
usage is \(O(m^2)\).

The algorithms “interv” and “interv\_km” solve approximately
the SCG problem by performing a (for now) constant binning of the components
of the eigenvectors, that is `nt[i]`

constant-size bins are used to
partition `V[,i]`

. When `algo`

= “interv\_km”, the (Lloyd)
k-means algorithm is run on each partition obtained by “interv” to
improve accuracy.

Once a minimizing partition (either exact or approximate) has been found for
each eigenvector, the final grouping is worked out as follows: two vertices
are grouped together in the final partition if they are grouped together in
each minimizing partition. In general the size of the final partition is not
known in advance when `ncol(V)`

>1.

Finally, the algorithm “exact\_scg” groups the vertices with equal components in each eigenvector. The last three algorithms essentially have linear running time and memory load.

##### Value

The coarse-grained graph, or matrix, possibly a sparse matrix.

A vector of `nrow(X)`

or `vcount(X)`

integers giving the group label of each object (vertex) in the partition.

The semi-projector \(L\) if `semproj = TRUE`

.

The
semi-projector \(R\) if `semproj = TRUE`

.

The computed
eigenvalues if `epairs = TRUE`

.

The computed or
supplied eigenvectors if `epairs = TRUE`

.

The stationary
probability vector if `mtype = stochastic`

and `stat.prob = TRUE`

.
For other matrix types this is missing.

##### References

D. Morton de Lachapelle, D. Gfeller, and P. De Los Rios,
Shrinking Matrices while Preserving their Eigenpairs with Application to the
Spectral Coarse Graining of Graphs. Submitted to *SIAM Journal on
Matrix Analysis and Applications*, 2008.
http://people.epfl.ch/david.morton

##### See Also

scg-method for an introduction. `scg_eps`

,
`scg_group`

and `scg_semi_proj`

.

##### Examples

```
# NOT RUN {
## We are not running these examples any more, because they
## take a long time (~20 seconds) to run and this is against the CRAN
## repository policy. Copy and paste them by hand to your R prompt if
## you want to run them.
# }
# NOT RUN {
# SCG of a toy network
g <- make_full_graph(5) %du% make_full_graph(5) %du% make_full_graph(5)
g <- add_edges(g, c(1,6, 1,11, 6, 11))
cg <- scg(g, 1, 3, algo="exact_scg")
#plot the result
layout <- layout_with_kk(g)
nt <- vcount(cg$Xt)
col <- rainbow(nt)
vsize <- table(cg$groups)
ewidth <- round(E(cg$Xt)$weight,2)
op <- par(mfrow=c(1,2))
plot(g, vertex.color = col[cg$groups], vertex.size = 20,
vertex.label = NA, layout = layout)
plot(cg$Xt, edge.width = ewidth, edge.label = ewidth,
vertex.color = col, vertex.size = 20*vsize/max(vsize),
vertex.label=NA, layout = layout_with_kk)
par(op)
## SCG of real-world network
library(igraphdata)
data(immuno)
summary(immuno)
n <- vcount(immuno)
interv <- c(100,100,50,25,12,6,3,2,2)
cg <- scg(immuno, ev= n-(1:9), nt=interv, mtype="laplacian",
algo="interv", epairs=TRUE)
## are the eigenvalues well-preserved?
gt <- cg$Xt
nt <- vcount(gt)
Lt <- laplacian_matrix(gt)
evalt <- eigen(Lt, only.values=TRUE)$values[nt-(1:9)]
res <- cbind(interv, cg$values, evalt)
res <- round(res,5)
colnames(res) <- c("interv","lambda_i","lambda_tilde_i")
rownames(res) <- c("N-1","N-2","N-3","N-4","N-5","N-6","N-7","N-8","N-9")
print(res)
## use SCG to get the communities
com <- scg(laplacian_matrix(immuno), ev=n-c(1,2), nt=2)$groups
col <- rainbow(max(com))
layout <- layout_nicely(immuno)
plot(immuno, layout=layout, vertex.size=3, vertex.color=col[com],
vertex.label=NA)
## display the coarse-grained graph
gt <- simplify(as.undirected(gt))
layout.cg <- layout_with_kk(gt)
com.cg <- scg(laplacian_matrix(gt), nt-c(1,2), 2)$groups
vsize <- sqrt(as.vector(table(cg$groups)))
op <- par(mfrow=c(1,2))
plot(immuno, layout=layout, vertex.size=3, vertex.color=col[com],
vertex.label=NA)
plot(gt, layout=layout.cg, vertex.size=15*vsize/max(vsize),
vertex.color=col[com.cg],vertex.label=NA)
par(op)
# }
# NOT RUN {
# }
```

*Documentation reproduced from package igraph, version 1.2.4.2, License: GPL (>= 2)*