# as

0th

Percentile

##### Force an Object to Belong to a Class

These functions manage the relations that allow coercing an object to a given class.

Keywords
classes, methods, programming
##### Usage
as(object, Class, strict=TRUE, ext)
as(object, Class) <- value
setAs(from, to, def, replace, where = topenv(parent.frame()))
##### Arguments
object
any R object.
Class
the name of the class to which object should be coerced.
strict
logical flag. If TRUE, the returned object must be strictly from the target class (unless that class is a virtual class, in which case the object will be from the closest actual class, in particular the original object, if that class extends the virtual class directly).

If strict = FALSE, any simple extension of the target class will be returned, without further change. A simple extension is, roughly, one that just adds slots to an existing class.

value
The value to use to modify object (see the discussion below). You should supply an object with class Class; some coercion is done, but you're unwise to rely on it.
from, to
The classes between which the coerce methods def and replace perform coercion.
def
function of one argument. It will get an object from class from and had better return an object of class to. The convention is that the name of the argument is from; if another argument name is used, setAs will attempt to substitute from.
replace
if supplied, the function to use as a replacement method, when as is used on the left of an assignment. Should be a function of two arguments, from, value, although setAs will attempt to substitute if the arguments differ.
where
the position or environment in which to store the resulting methods. For most applications, it is recommended to omit this argument and to include the call to setAs in source code that is evaluated at the top level; that is, either in an R session by something equivalent to a call to source, or as part of the R source code for a package.
ext
the optional object defining how Class is extended by the class of the object (as returned by possibleExtends). This argument is used internally (to provide essential information for non-public classes), but you are unlikely to want to use it directly.
##### Summary of Functions

as:
Returns the version of this object coerced to be the given Class. When used in the replacement form on the left of an assignment, the portion of the object corresponding to Class is replaced by value. The operation of as() in either form depends on the definition of coerce methods. Methods are defined automatically when the two classes are related by inheritance; that is, when one of the classes is a subclass of the other. See the section on inheritance below for details. Coerce methods are also predefined for basic classes (including all the types of vectors, functions and a few others). See showMethods(coerce) for a list of these. Beyond these two sources of methods, further methods are defined by calls to the setAs function.
setAs:
Define methods for coercing an object of class from to be of class to; the def argument provides for direct coercing and the replace argument, if included, provides for replacement. See the “How” section below for details.
coerce, coerce<-:
Coerce from to be of the same class as to. These functions should not be called explicitly. The function setAs creates methods for them for the as function to use.

##### Inheritance and Coercion

Objects from one class can turn into objects from another class either automatically or by an explicit call to the as function. Automatic conversion is special, and comes from the designer of one class of objects asserting that this class extends another class. The most common case is that one or more class names are supplied in the contains= argument to setClass, in which case the new class extends each of the earlier classes (in the usual terminology, the earlier classes are superclasses of the new class and it is a subclass of each of them). This form of inheritance is called simple inheritance in R. See setClass for details. Inheritance can also be defined explicitly by a call to setIs. The two versions have slightly different implications for coerce methods. Simple inheritance implies that inherited slots behave identically in the subclass and the superclass. Whenever two classes are related by simple inheritance, corresponding coerce methods are defined for both direct and replacement use of as. In the case of simple inheritance, these methods do the obvious computation: they extract or replace the slots in the object that correspond to those in the superclass definition. The implicitly defined coerce methods may be overridden by a call to setAs; note, however, that the implicit methods are defined for each subclass-superclass pair, so that you must override each of these explicitly, not rely on inheritance. When inheritance is defined by a call to setIs, the coerce methods are provided explicitly, not generated automatically. Inheritance will apply (to the from argument, as described in the section below). You could also supply methods via setAs for non-inherited relationships, and now these also can be inherited. For further on the distinction between simple and explicit inheritance, see setIs.

##### How Functions 'as' and 'setAs' Work

The function as turns object into an object of class Class. In doing so, it applies a “coerce method”, using S4 classes and methods, but in a somewhat special way. Coerce methods are methods for the function coerce or, in the replacement case the function coerce<-. These functions have two arguments in method signatures, from and to, corresponding to the class of the object and the desired coerce class. These functions must not be called directly, but are used to store tables of methods for the use of as, directly and for replacements. In this section we will describe the direct case, but except where noted the replacement case works the same way, using coerce<- and the replace argument to setAs, rather than coerce and the def argument. Assuming the object is not already of the desired class, as first looks for a method in the table of methods for the function coerce for the signature c(from = class(object), to = Class), in the same way method selection would do its initial lookup. To be precise, this means the table of both direct and inherited methods, but inheritance is used specially in this case (see below). If no method is found, as looks for one. First, if either Class or class(object) is a superclass of the other, the class definition will contain the information needed to construct a coerce method. In the usual case that the subclass contains the superclass (i.e., has all its slots), the method is constructed either by extracting or replacing the inherited slots. Non-simple extensions (the result of a call to setIs) will usually contain explicit methods, though possibly not for replacement. If no subclass/superclass relationship provides a method, as looks for an inherited method, but applying, inheritance for the argument from only, not for the argument to (if you think about it, you'll probably agree that you wouldn't want the result to be from some class other than the Class specified). Thus, selectMethod("coerce", sig, useInherited= c(from=TRUE, to= FALSE)) replicates the method selection used by as(). In nearly all cases the method found in this way will be cached in the table of coerce methods (the exception being subclass relationships with a test, which are legal but discouraged). So the detailed calculations should be done only on the first occurrence of a coerce from class(object) to Class. Note that coerce is not a standard generic function. It is not intended to be called directly. To prevent accidentally caching an invalid inherited method, calls are routed to an equivalent call to as, and a warning is issued. Also, calls to selectMethod for this function may not represent the method that as will choose. You can only trust the result if the corresponding call to as has occurred previously in this session. With this explanation as background, the function setAs does a fairly obvious computation: It constructs and sets a method for the function coerce with signature c(from, to), using the def argument to define the body of the method. The function supplied as def can have one argument (interpreted as an object to be coerced) or two arguments (the from object and the to class). Either way, setAs constructs a function of two arguments, with the second defaulting to the name of the to class. The method will be called from as with the object as the from argument and no to argument, with the default for this argument being the name of the intended to class, so the method can use this information in messages. The direct version of the as function also has a strict= argument that defaults to TRUE. Calls during the evaluation of methods for other functions will set this argument to FALSE. The distinction is relevant when the object being coerced is from a simple subclass of the to class; if strict=FALSE in this case, nothing need be done. For most user-written coerce methods, when the two classes have no subclass/superclass, the strict= argument is irrelevant. The replace argument to setAs provides a method for coerce<-. As with all replacement methods, the last argument of the method must have the name value for the object on the right of the assignment. As with the coerce method, the first two arguments are from, to; there is no strict= option for the replace case. The function coerce exists as a repository for such methods, to be selected as described above by the as function. Actually dispatching the methods using standardGeneric could produce incorrect inherited methods, by using inheritance on the to argument; as mentioned, this is not the logic used for as. To prevent selecting and caching invalid methods, calls to coerce are currently mapped into calls to as, with a warning message.

##### Basic Coercion Methods

Methods are pre-defined for coercing any object to one of the basic datatypes. For example, as(x, "numeric") uses the existing as.numeric function. These built-in methods can be listed by showMethods("coerce").

##### References

Chambers, John M. (2008) Software for Data Analysis: Programming with R Springer. (For the R version.)

Chambers, John M. (1998) Programming with Data Springer (For the original S4 version.)

If you think of using try(as(x, cl)), consider canCoerce(x, cl) instead.

##### Aliases
• as
• as<-
• coerce
• coerce<-
• setAs
• coerce-methods
• coerce,ANY,array-method
• coerce,ANY,call-method
• coerce,ANY,character-method
• coerce,ANY,complex-method
• coerce,ANY,environment-method
• coerce,ANY,expression-method
• coerce,ANY,function-method
• coerce,ANY,integer-method
• coerce,ANY,list-method
• coerce,ANY,logical-method
• coerce,ANY,matrix-method
• coerce,ANY,name-method
• coerce,ANY,numeric-method
• coerce,ANY,single-method
• coerce,ANY,ts-method
• coerce,ANY,vector-method
• coerce,ANY,NULL-method
##### Examples
library(methods) ## using the definition of class "track" from \link{setClass} setAs("track", "numeric", function(from) from@y) t1 <- new("track", x=1:20, y=(1:20)^2) as(t1, "numeric") ## The next example shows: ## 1. A virtual class to define setAs for several classes at once. ## 2. as() using inherited information setClass("ca", representation(a = "character", id = "numeric")) setClass("cb", representation(b = "character", id = "numeric")) setClass("id") setIs("ca", "id") setIs("cb", "id") setAs("id", "numeric", function(from) from@id) CA <- new("ca", a = "A", id = 1) CB <- new("cb", b = "B", id = 2) setAs("cb", "ca", function(from, to )new(to, a=from@b, id = from@id)) as(CB, "numeric") 
Documentation reproduced from package methods, version 3.3.0, License: Part of R 3.3.0

### Community examples

Looks like there are no examples yet.