This function generates multivariate missing data in a MCAR, MAR or MNAR manner.
Imputation of data sets containing missing values can be performed with
`mice`

.

```
ampute(data, prop = 0.5, patterns = NULL, freq = NULL, mech = "MAR",
weights = NULL, cont = TRUE, type = NULL, odds = NULL,
bycases = TRUE, run = TRUE)
```

data

A complete data matrix or dataframe. Values should be numeric. Categorical variables should have been transformed into dummies.

prop

A scalar specifying the proportion of missingness. Should be a value between 0 and 1. Default is a missingness proportion of 0.5.

patterns

A matrix or data frame of size #patterns by #variables where
`0`

indicates a variable should have missing values and `1`

indicates
a variable should remain complete. The user may specify as many patterns as
desired. One pattern (a vector) or double patterns are possible as well. Default
is a square matrix of size #variables where each pattern has missingness on one
variable only (created with `ampute.default.patterns`

). After the
amputation procedure, `md.pattern`

can be used to investigate the
missing data patterns in the data.

freq

A vector of length #patterns containing the relative frequency with
which the patterns should occur. For example, for three missing data patterns,
the vector could be `c(0.4, 0.4, 0.2)`

, meaning that of all cases with
missing values, 40 percent should have pattern 1, 40 percent pattern 2 and 20
percent pattern 3. The vector should sum to 1. Default is an equal probability
for each pattern, created with `ampute.default.freq`

.

mech

A string specifying the missingness mechanism, either MCAR (Missing Complete At Random), MAR (Missing At Random) or MNAR (Missing Not At Random). Default is a MAR missingness mechanism.

weights

A matrix or data frame of size #patterns by #variables. The matrix
contains the weights that will be used to calculate the weighted sum scores. For
a MAR mechanism, weights of the variables that will be made incomplete, should be
zero. For a MNAR mechanism, these weights might have any possible value. Furthermore,
the weights may differ between patterns and between variables. They may be negative
as well. Within each pattern, the relative size of the values are of importance.
The default weights matrix is made with `ampute.default.weights`

and
returns a matrix with equal weights for all variables. In case of MAR, variables
that will be amputed will be weighted with `0`

. If it is MNAR, variables
that will be observed will be weighted with `0`

. If mechanism is MCAR, the
weights matrix will not be used.

cont

Logical. Whether the probabilities should be based on a continuous
or discrete distribution. If TRUE, the probabilities of being missing are based
on a continuous logit distribution. `ampute.continuous`

will be used
to calculate and assign the probabilities. These will be based on argument
`type`

. If FALSE, the probabilities of being missing are based on a discrete
distribution (`ampute.discrete`

) based on the `odds`

argument.
Default is TRUE.

type

A vector of strings containing the type of missingness for each
pattern. Either `"LEFT"`

, `"MID"`

, `"TAIL"`

or '`"RIGHT"`

.
If a single missingness type is entered, all patterns will be created by the same
type. If missingness types should differ over patterns, a vector of missingness
types should be entered. Default is RIGHT for all patterns and is the result of
`ampute.default.type`

.

odds

A matrix where #patterns defines the #rows. Each row should contain
the odds of being missing for the corresponding pattern. The amount of odds values
defines in how many quantiles the sum scores will be divided. The values are
relative probabilities: a quantile with odds value 4 will have a probability of
being missing that is four times higher than a quantile with odds 1. The
#quantiles may differ between the patterns, specify NA for cells remaining empty.
Default is 4 quantiles with odds values 1, 2, 3 and 4, the result of
`ampute.default.odds`

.

bycases

Logical. If TRUE, the proportion of missingness is defined in terms of cases. If FALSE, the proportion of missingness is defined in terms of cells. Default is TRUE.

run

Logical. If TRUE, the amputations are implemented. If FALSE, the return object will contain everything but the amputed data set.

Returns an S3 object of class `mads-class`

(multivariate
amputed data set)

When new multiple imputation techniques are tested, missing values need to be
generated in simulated data sets. The generation of missing values is what
we call: amputation. The function `ampute`

is developed to perform any kind
of amputation desired by the researcher. An extensive example and more explanation
of the function can be found in the vignette *Multivariate Amputation using
Ampute*, available in mice as well. For imputation, the function
`mice`

is advised.

Until recently, univariate amputation procedures were used to generate missing data in complete, simulated data sets. With this approach, variables are made incomplete one variable at a time. When several variables need to be amputed, the procedure is repeated multiple times.

With this univariate approach, it is difficult to relate the missingness on one
variable to the missingness on another variable. A multivariate amputation procedure
solves this issue and moreover, it does justice to the multivariate nature of
data sets. Hence, `ampute`

is developed to perform the amputation according
the researcher's desires.

The idea behind the function is the specification of several missingness
patterns. Each pattern is a combination of variables with and without missing
values (denoted by `0`

and `1`

respectively). For example, one might
want to create two missingness patterns on a data set with four variables. The
patterns could be something like: `0, 0, 1, 1`

and `1, 0, 1, 0`

.
Each combination of zeros and ones may occur.

Furthermore, the researcher specifies the proportion of missingness, either the proportion of missing cases or the proportion of missing cells, and the relative frequency each pattern occurs. Consequently, the data is divided over the patterns with these probabilities. Now, each case is candidate for a certain missingness pattern, but whether the case will have missing values eventually, depends on other specifications.

The first of these specifications is the missing mechanism. There are three possible mechanisms: the missingness depends completely on chance (MCAR), the missingness depends on the values of the observed variables (i.e. the variables that remain complete) (MAR) or on the values of the variables that will be made incomplete (MNAR). For a more thorough explanation of these definitions, I refer to Van Buuren (2012).

When the user sets the missingness mechanism to `"MCAR"`

, the candidates
have an equal probability of having missing values. No other specifications
have to be made. For a `"MAR"`

or `"MNAR"`

mechanism, weighted sum
scores are calculated. These scores are a linear combination of the
variables.

In order to calculate the weighted sum scores, the data is standardized. That
is the reason the data has to be numeric. Second, for each case, the values in
the data set are multiplied with the weights, specified by argument `weights`

.
These weighted scores will be summed, resulting in a weighted sum score for each case.

The weights may differ between patterns and they may be negative or zero as well.
Naturally, in case of a `MAR`

mechanism, the weights corresponding to the
variables that will be made incomplete, have a `0`

. Note that this might be
different for each pattern. In case of `MNAR`

missingness, especially
the weights of the variables that will be made incomplete are of importance. However,
the other variables might be weighted as well.

It is the relative difference between the weights that will result in an effect in the sum scores. For example, for the first missing data pattern mentioned above, the weights for the third and fourth variables might be set to 2 and 4. However, weight values of 0.2 and 0.4 will have the exact same effect on the weighted sum score: the fourth variable is weighted twice as much as variable 3.

Based on the weighted sum scores, either a discrete or continuous distribution of probabilities is used to calculate whether a candidate will have missing values.

For a discrete distribution of probabilities, the weighted sum scores are divided into subgroups of equal size (quantiles). Thereafter, the user specifies for each subgroup the odds of being missing. Both the number of subgroups and the odds values are important for the generation of missing data. For example, for a RIGHT-like mechanism, scoring in one of the higher quantiles should have high missingness odds, whereas for a MID-like mechanism, the central groups should have higher odds. Again, not the size of the odds values are of importance, but the relative distance between the values.

The continuous distributions of probabilities are based on the logit function, as described by Van Buuren (2012). The user can specify the type of missingness, which, again, may differ between patterns.

For an extensive example of the working of the function, I gladly refer to the
vignette *Multivariate Amputation using Ampute*.

Brand, J.P.L. (1999). *Development, implementation and
evaluation of multiple imputation strategies for the statistical analysis of
incomplete data sets* (pp. 110-113). Dissertation. Rotterdam: Erasmus University.

Van Buuren, S., Brand, J.P.L., Groothuis-Oudshoorn, C.G.M., Rubin, D.B. (2006).
Fully conditional specification in multivariate imputation. *Journal of
Statistical Computation and Simulation*, 76*(12)*, Appendix B.

Van Buuren, S. (2012). *Flexible imputation of missing data.*
Boca Raton, FL.: Chapman & Hall/CRC Press.

Vink, G. (2016). Towards a standardized evaluation of multiple imputation routines.

`mads-class`

, `bwplot`

, `xyplot`

,
`ampute.mcar`

, `ampute.continuous`

,
`ampute.discrete`

, `mice`

# NOT RUN { # Simulate data set with \code{mvrnorm} from package \code{\pkg{MASS}}. require(MASS) sigma <- matrix(data = c(1, 0.2, 0.2, 0.2, 1, 0.2, 0.2, 0.2, 1), nrow = 3) complete.data <- mvrnorm(n = 100, mu = c(5, 5, 5), Sigma = sigma) # Perform quick amputation result1 <- ampute(data = complete.data) # Change default matrices as desired patterns <- result1$patterns patterns[1:3, 2] <- 0 odds <- result1$odds odds[2,3:4] <- c(2, 4) odds[3,] <- c(3, 1, NA, NA) # Rerun amputation result3 <- ampute(data = complete.data, patterns = patterns, freq = c(0.3, 0.3, 0.4), cont = FALSE, odds = odds) # Run an amputation procedure with continuous probabilities result4 <- ampute(data = complete.data, type = c("RIGHT", "TAIL", "LEFT")) # }

Run the code above in your browser using DataCamp Workspace