parameters (version 0.19.0)

standardize_parameters: Parameters standardization

Description

Compute standardized model parameters (coefficients).

Usage

standardize_parameters(
  model,
  method = "refit",
  ci = 0.95,
  robust = FALSE,
  two_sd = FALSE,
  include_response = TRUE,
  verbose = TRUE,
  ...
)
standardize_posteriors(
  model,
  method = "refit",
  robust = FALSE,
  two_sd = FALSE,
  include_response = TRUE,
  verbose = TRUE,
  ...
)

Value

A data frame with the standardized parameters (Std_*, depending on the model type) and their CIs (CI_low and CI_high). Where applicable, standard errors (SEs) are returned as an attribute (attr(x, "standard_error")).

Arguments

model

A statistical model.

method

The method used for standardizing the parameters. Can be "refit" (default), "posthoc", "smart", "basic" or "pseudo". See 'Details'.

ci

Confidence Interval (CI) level

robust

Logical, if TRUE, centering is done by subtracting the median from the variables and dividing it by the median absolute deviation (MAD). If FALSE, variables are standardized by subtracting the mean and dividing it by the standard deviation (SD).

two_sd

If TRUE, the variables are scaled by two times the deviation (SD or MAD depending on robust). This method can be useful to obtain model coefficients of continuous parameters comparable to coefficients related to binary predictors, when applied to the predictors (not the outcome) (Gelman, 2008).

include_response

If TRUE (default), the response value will also be standardized. If FALSE, only the predictors will be standardized. For GLMs the response value will never be standardized (see Generalized Linear Models section).

verbose

Toggle warnings and messages on or off.

...

For standardize_parameters(), arguments passed to model_parameters(), such as:

• ci_method, centrality for Mixed models and Bayesian models...

• exponentiate, ...

• etc.

Standardization Methods

• refit: This method is based on a complete model re-fit with a standardized version of the data. Hence, this method is equal to standardizing the variables before fitting the model. It is the "purest" and the most accurate (Neter et al., 1989), but it is also the most computationally costly and long (especially for heavy models such as Bayesian models). This method is particularly recommended for complex models that include interactions or transformations (e.g., polynomial or spline terms). The robust (default to FALSE) argument enables a robust standardization of data, i.e., based on the median and MAD instead of the mean and SD. See standardize() for more details.

  • Note that standardize_parameters(method = "refit") may not return the same results as fitting a model on data that has been standardized with standardize(); standardize_parameters() used the data used by the model fitting function, which might not be same data if there are missing values. see the remove_na argument in standardize().

• posthoc: Post-hoc standardization of the parameters, aiming at emulating the results obtained by "refit" without refitting the model. The coefficients are divided by the standard deviation (or MAD if robust) of the outcome (which becomes their expression 'unit'). Then, the coefficients related to numeric variables are additionally multiplied by the standard deviation (or MAD if robust) of the related terms, so that they correspond to changes of 1 SD of the predictor (e.g., "A change in 1 SD of x is related to a change of 0.24 of the SD of y). This does not apply to binary variables or factors, so the coefficients are still related to changes in levels. This method is not accurate and tend to give aberrant results when interactions are specified.

• basic: This method is similar to method = "posthoc", but treats all variables as continuous: it also scales the coefficient by the standard deviation of model's matrix' parameter of factors levels (transformed to integers) or binary predictors. Although being inappropriate for these cases, this method is the one implemented by default in other software packages, such as lm.beta::lm.beta().

• smart (Standardization of Model's parameters with Adjustment, Reconnaissance and Transformation - experimental): Similar to method = "posthoc" in that it does not involve model refitting. The difference is that the SD (or MAD if robust) of the response is computed on the relevant section of the data. For instance, if a factor with 3 levels A (the intercept), B and C is entered as a predictor, the effect corresponding to B vs. A will be scaled by the variance of the response at the intercept only. As a results, the coefficients for effects of factors are similar to a Glass' delta.

• pseudo (for 2-level (G)LMMs only): In this (post-hoc) method, the response and the predictor are standardized based on the level of prediction (levels are detected with performance::check_heterogeneity_bias()): Predictors are standardized based on their SD at level of prediction (see also datawizard::demean()); The outcome (in linear LMMs) is standardized based on a fitted random-intercept-model, where sqrt(random-intercept-variance) is used for level 2 predictors, and sqrt(residual-variance) is used for level 1 predictors (Hoffman 2015, page 342). A warning is given when a within-group variable is found to have access between-group variance.

Transformed Variables

When the model's formula contains transformations (e.g. y ~ exp(X)) method = "refit" will give different results compared to method = "basic" ("posthoc" and "smart" do not support such transformations): While "refit" standardizes the data prior to the transformation (e.g. equivalent to exp(scale(X))), the "basic" method standardizes the transformed data (e.g. equivalent to scale(exp(X))).

See the Transformed Variables section in standardize.default() for more details on how different transformations are dealt with when method = "refit".

Confidence Intervals

The returned confidence intervals are re-scaled versions of the unstandardized confidence intervals, and not "true" confidence intervals of the standardized coefficients (cf. Jones & Waller, 2015).

Generalized Linear Models

Standardization for generalized linear models (GLM, GLMM, etc) is done only with respect to the predictors (while the outcome remains as-is, unstandardized) - maintaining the interpretability of the coefficients (e.g., in a binomial model: the exponent of the standardized parameter is the OR of a change of 1 SD in the predictor, etc.)

Dealing with Factors

standardize(model) or standardize_parameters(model, method = "refit") do not standardize categorical predictors (i.e. factors) / their dummy-variables, which may be a different behaviour compared to other R packages (such as lm.beta) or other software packages (like SPSS). To mimic such behaviours, either use standardize_parameters(model, method = "basic") to obtain post-hoc standardized parameters, or standardize the data with datawizard::standardize(data, force = TRUE) before fitting the model.

References

• Hoffman, L. (2015). Longitudinal analysis: Modeling within-person fluctuation and change. Routledge.

• Jones, J. A., & Waller, N. G. (2015). The normal-theory and asymptotic distribution-free (ADF) covariance matrix of standardized regression coefficients: theoretical extensions and finite sample behavior. Psychometrika, 80(2), 365-378.

• Neter, J., Wasserman, W., & Kutner, M. H. (1989). Applied linear regression models.

• Gelman, A. (2008). Scaling regression inputs by dividing by two standard deviations. Statistics in medicine, 27(15), 2865-2873.

See Also

Other standardize: standardize_info()

Examples

model <- lm(len ~ supp * dose, data = ToothGrowth)
standardize_parameters(model, method = "refit")
# \donttest{
standardize_parameters(model, method = "posthoc")
standardize_parameters(model, method = "smart")
standardize_parameters(model, method = "basic")

# Robust and 2 SD
standardize_parameters(model, robust = TRUE)
standardize_parameters(model, two_sd = TRUE)

model <- glm(am ~ cyl * mpg, data = mtcars, family = "binomial")
standardize_parameters(model, method = "refit")
standardize_parameters(model, method = "posthoc")
standardize_parameters(model, method = "basic", exponentiate = TRUE)
# }

if (require("lme4")) {
# \donttest{
  m <- lme4::lmer(mpg ~ cyl + am + vs + (1 | cyl), mtcars)
  standardize_parameters(m, method = "pseudo", ci_method = "satterthwaite")
# }
}

if (FALSE) {
if (require("rstanarm")) {
  model <- rstanarm::stan_glm(rating ~ critical + privileges, data = attitude, refresh = 0)
  standardize_posteriors(model, method = "refit")
  standardize_posteriors(model, method = "posthoc")
  standardize_posteriors(model, method = "smart")
  head(standardize_posteriors(model, method = "basic"))
}
}