paws.compute (version 0.1.12)

ec2_create_route: Creates a route in a route table within a VPC

Description

Creates a route in a route table within a VPC.

You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway.

When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:

• 192.0.2.0/24 (goes to some target A)

• 192.0.2.0/28 (goes to some target B)

Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic.

For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.

Usage

ec2_create_route(DestinationCidrBlock, DestinationIpv6CidrBlock,
  DestinationPrefixListId, DryRun, VpcEndpointId,
  EgressOnlyInternetGatewayId, GatewayId, InstanceId, NatGatewayId,
  TransitGatewayId, LocalGatewayId, CarrierGatewayId, NetworkInterfaceId,
  RouteTableId, VpcPeeringConnectionId)

Value

A list with the following syntax:

list(
  Return = TRUE|FALSE
)

Arguments

DestinationCidrBlock

The IPv4 CIDR address block used for the destination match. Routing decisions are based on the most specific match. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.

DestinationIpv6CidrBlock

The IPv6 CIDR block used for the destination match. Routing decisions are based on the most specific match.

DestinationPrefixListId

The ID of a prefix list used for the destination match.

DryRun

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

VpcEndpointId

The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.

EgressOnlyInternetGatewayId

[IPv6 traffic only] The ID of an egress-only internet gateway.

GatewayId

The ID of an internet gateway or virtual private gateway attached to your VPC.

InstanceId

The ID of a NAT instance in your VPC. The operation fails if you specify an instance ID unless exactly one network interface is attached.

NatGatewayId

[IPv4 traffic only] The ID of a NAT gateway.

TransitGatewayId

The ID of a transit gateway.

LocalGatewayId

The ID of the local gateway.

CarrierGatewayId

The ID of the carrier gateway.

You can only use this option when the VPC contains a subnet which is associated with a Wavelength Zone.

NetworkInterfaceId

The ID of a network interface.

RouteTableId

[required] The ID of the route table for the route.

VpcPeeringConnectionId

The ID of a VPC peering connection.

Request syntax

svc$create_route(
  DestinationCidrBlock = "string",
  DestinationIpv6CidrBlock = "string",
  DestinationPrefixListId = "string",
  DryRun = TRUE|FALSE,
  VpcEndpointId = "string",
  EgressOnlyInternetGatewayId = "string",
  GatewayId = "string",
  InstanceId = "string",
  NatGatewayId = "string",
  TransitGatewayId = "string",
  LocalGatewayId = "string",
  CarrierGatewayId = "string",
  NetworkInterfaceId = "string",
  RouteTableId = "string",
  VpcPeeringConnectionId = "string"
)

Examples

if (FALSE) {
# This example creates a route for the specified route table. The route
# matches all traffic (0.0.0.0/0) and routes it to the specified Internet
# gateway.
svc$create_route(
  DestinationCidrBlock = "0.0.0.0/0",
  GatewayId = "igw-c0a643a9",
  RouteTableId = "rtb-22574640"
)
}