Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it.
See https://www.paws-r-sdk.com/docs/s3_put_object/ for full documentation.
s3_put_object(
ACL = NULL,
Body = NULL,
Bucket,
CacheControl = NULL,
ContentDisposition = NULL,
ContentEncoding = NULL,
ContentLanguage = NULL,
ContentLength = NULL,
ContentMD5 = NULL,
ContentType = NULL,
ChecksumAlgorithm = NULL,
ChecksumCRC32 = NULL,
ChecksumCRC32C = NULL,
ChecksumSHA1 = NULL,
ChecksumSHA256 = NULL,
Expires = NULL,
GrantFullControl = NULL,
GrantRead = NULL,
GrantReadACP = NULL,
GrantWriteACP = NULL,
Key,
Metadata = NULL,
ServerSideEncryption = NULL,
StorageClass = NULL,
WebsiteRedirectLocation = NULL,
SSECustomerAlgorithm = NULL,
SSECustomerKey = NULL,
SSECustomerKeyMD5 = NULL,
SSEKMSKeyId = NULL,
SSEKMSEncryptionContext = NULL,
BucketKeyEnabled = NULL,
RequestPayer = NULL,
Tagging = NULL,
ObjectLockMode = NULL,
ObjectLockRetainUntilDate = NULL,
ObjectLockLegalHoldStatus = NULL,
ExpectedBucketOwner = NULL
)The canned ACL to apply to the object. For more information, see Canned ACL.
This action is not supported by Amazon S3 on Outposts.
Object data.
[required] The bucket name to which the PUT action was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When you use this action with Amazon S3 on Outposts, you must direct
requests to the S3 on Outposts hostname. The S3 on Outposts hostname
takes the form
AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com.
When you use this action with S3 on Outposts through the Amazon Web
Services SDKs, you provide the Outposts access point ARN in place of the
bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts?
in the Amazon S3 User Guide.
Can be used to specify caching behavior along the request/reply chain. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.9.
Specifies presentational information for the object. For more information, see https://www.rfc-editor.org/rfc/rfc6266#section-4.
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field. For more information, see https://www.rfc-editor.org/rfc/rfc9110.html#field.content-encoding.
The language the content is in.
Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically. For more information, see https://www.rfc-editor.org/rfc/rfc9110.html#name-content-length.
The base64-encoded 128-bit MD5 digest of the message (without the headers) according to RFC 1864. This header can be used as a message integrity check to verify that the data is the same data that was originally sent. Although it is optional, we recommend using the Content-MD5 mechanism as an end-to-end integrity check. For more information about REST request authentication, see REST Authentication.
A standard MIME type describing the format of the contents. For more information, see https://www.rfc-editor.org/rfc/rfc9110.html#name-content-type.
Indicates the algorithm used to create the checksum for the object when
using the SDK. This header will not provide any additional functionality
if not using the SDK. When sending this header, there must be a
corresponding x-amz-checksum or x-amz-trailer header sent.
Otherwise, Amazon S3 fails the request with the HTTP status code
400 Bad Request. For more information, see Checking object integrity
in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided
ChecksumAlgorithm parameter.
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
The date and time at which the object is no longer cacheable. For more information, see https://www.rfc-editor.org/rfc/rfc7234#section-5.3.
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
This action is not supported by Amazon S3 on Outposts.
Allows grantee to read the object data and its metadata.
This action is not supported by Amazon S3 on Outposts.
Allows grantee to read the object ACL.
This action is not supported by Amazon S3 on Outposts.
Allows grantee to write the ACL for the applicable object.
This action is not supported by Amazon S3 on Outposts.
[required] Object key for which the PUT action was initiated.
A map of metadata to store with the object in S3.
The server-side encryption algorithm used when storing this object in
Amazon S3 (for example, AES256, aws:kms, aws:kms:dsse).
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata. For information about object metadata, see Object Key and Metadata.
In the following example, the request header sets the redirect to an object (anotherPage.html) in the same bucket:
x-amz-website-redirect-location: /anotherPage.html
In the following example, the request header sets the object redirect to another website:
x-amz-website-redirect-location: http://www.example.com/
For more information about website hosting in Amazon S3, see Hosting Websites on Amazon S3 and How to Configure Website Page Redirects.
Specifies the algorithm to use to when encrypting the object (for example, AES256).
Specifies the customer-provided encryption key for Amazon S3 to use in
encrypting data. This value is used to store the object and then it is
discarded; Amazon S3 does not store the encryption key. The key must be
appropriate for use with the algorithm specified in the
x-amz-server-side-encryption-customer-algorithm header.
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
If x-amz-server-side-encryption has a valid value of aws:kms or
aws:kms:dsse, this header specifies the ID of the Key Management
Service (KMS) symmetric encryption customer managed key that was used
for the object. If you specify x-amz-server-side-encryption:aws:kms or
x-amz-server-side-encryption:aws:kms:dsse, but do not
provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses
the Amazon Web Services managed key (aws/s3) to protect the data. If
the KMS key does not exist in the same account that's issuing the
command, you must use the full ARN and not just the ID.
Specifies the Amazon Web Services KMS Encryption Context to use for
object encryption. The value of this header is a base64-encoded UTF-8
string holding JSON with the encryption context key-value pairs. This
value is stored as object metadata and automatically gets passed on to
Amazon Web Services KMS for future get_object or
copy_object operations on this object.
Specifies whether Amazon S3 should use an S3 Bucket Key for object
encryption with server-side encryption using Key Management Service
(KMS) keys (SSE-KMS). Setting this header to true causes Amazon S3 to
use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with a PUT action doesn’t affect bucket-level settings for S3 Bucket Key.
The tag-set for the object. The tag-set must be encoded as URL Query parameters. (For example, "Key1=Value1")
The Object Lock mode that you want to apply to this object.
The date and time when you want this object's Object Lock to expire. Must be formatted as a timestamp parameter.
Specifies whether a legal hold will be applied to this object. For more information about S3 Object Lock, see Object Lock.
The account ID of the expected bucket owner. If the bucket is owned by a
different account, the request fails with the HTTP status code
403 Forbidden (access denied).