m325traceline: Minenergo-325. Trace thermal-hydraulic regime for linear segment of district heating network

Description

Trace values of thermal-hydraulic regime (temperature, pressure, flow_rate, and other) along the adjacent linear segments of pipeline using norms of heat loss values prescribed by Minenergo Order 325.

Usage

m325traceline(
  temperature = 130,
  pressure = mpa_kgf(6),
  flow_rate = 250,
  g = 0,
  d = 700,
  len = c(600, 530, 300, 350),
  year = 1986,
  insulation = 0,
  laying = "underground",
  beta = FALSE,
  exp5k = TRUE,
  roughness = 0.006,
  inlet = 0,
  outlet = 0,
  elev_tol = 0.1,
  method = "romeo",
  forward = TRUE,
  absg = TRUE
)

Value

list containing results (detailed log) of tracing for each pipe in tracing path enumerated along the direction of flow:

temperature: Traced thermal hydraulic regime. Traced temperature of heat carrier (water), [°C]. Type: assert_double.
pressure: Traced thermal hydraulic regime. Traced pressure of heat carrier (water) for each pipe in tracing path enumerated along the direction of flow, [MPa]. Type: assert_double.
flow_rate: Traced thermal hydraulic regime. Traced flow rate of heat carrier (water) for each pipe in tracing path enumerated along the direction of flow, [ton/hour]. Type: assert_double.
loss: Traced thermal hydraulic regime. Normative specific heat loss power for each pipe in tracing path enumerated along the direction of flow, [kcal/m/h]. Type: assert_double.
flux: Traced thermal hydraulic regime. Normative heat flux for each pipe in tracing path enumerated along the direction of flow, [W/m^2]. Type: assert_double.
Q: Traced thermal hydraulic regime. Normative heat loss for each pipe in tracing path enumerated along the direction of flow per day, [kcal]. Type: assert_double.

Type: assert_list.

Arguments

temperature

Traced thermal hydraulic regime. Sensor-measured temperature of heat carrier (water) inside the pipe sensor-measured at the inlet (forward tracing) or at the outlet (backward tracing) of path, [°C]. Type: assert_number.

pressure

Traced thermal hydraulic regime. Sensor-measured absolute pressure of heat carrier (water) sensor-measured at the inlet (forward tracing) or at the outlet (backward tracing) of path, [MPa]. Type: assert_number.

flow_rate

Traced thermal hydraulic regime. Amount of heat carrier (water) sensor-measured at the inlet (forward tracing) or at the outlet (backward tracing) of path, [ton/hour]. Type: assert_number.

g

amount of heat carrier discharge to network for each pipe segment in the tracing path enumerated along the direction of flow. If flag absg is TRUE then they treat argument g as absolute value in [ton/hour], otherwise they do as percentage of flow_rate in the pipe segment. Type: assert_double.

d

internal diameters of subsequent pipes in tracing path that are enumerated along the direction of flow, [mm]. Type: assert_double.

len

length of subsequent pipes in tracing path that are enumerated along the direction of flow, [m]. Type: assert_double.

year

year when pipe is put in operation after laying or total overhaul for each pipe in tracing path enumerated along the direction of flow. Type: assert_integerish.

insulation

insulation that covers the exterior of pipe:

0: no insulation

1

foamed polyurethane or analogue

2

polymer concrete

for each pipe in tracing path enumerated along the direction of flow. Type: assert_numeric and assert_subset.

laying

type of pipe laying depicting the position of pipe in space:

air
channel
room
tunnel
underground

for each pipe in tracing path enumerated along the direction of flow. Type: assert_character and assert_subset.

beta

logical indicator: should they consider additional heat loss of fittings? Logical value for each pipe in tracing path enumerated along the direction of flow. Type: assert_logical.

exp5k

logical indicator for regime of pipe: is pipe operated more that 5000 hours per year? Logical value for each pipe in tracing path enumerated along the direction of flow. Type: assert_logical.

roughness

roughness of internal wall for each pipe in tracing path enumerated along the direction of flow, [m]. Type: assert_double.

inlet

elevation of pipe inlet for each pipe in tracing path enumerated along the direction of flow, [m]. Type: assert_double.

outlet

elevation of pipe outlet for each pipe in tracing path enumerated along the direction of flow, [m]. Type: assert_double.

elev_tol

maximum allowed discrepancy between adjacent outlet and inlet elevations of two subsequent pipes in the traced path, [m]. Type: assert_number.

method

method of determining Darcy friction factor

romeo
vatankhan
buzelli

Type: assert_choice. For more details see dropp.

forward

tracing direction flag: is it a forward direction of tracing? If FALSE the backward tracing is performed. Type: assert_flag.

absg

Whether argument g (amount of heat carrier discharge to network) is an absolute value in [ton/hour] (TRUE) or is it a percentage of flow rate in the pipe segment (FALSE)? Type: assert_flag.

Details

The calculated (values of) regime may be considered as representation of district heating process in conditions of hypothetically perfect technical state of pipe walls and insulation.

They consider only simple tracing paths which do not contain rings and any kind of parallelization. At the same time bidirectional (forward and backward) tracing is possible in accordance with sensor position. They also may consider discharges to network at the inlet of each pipeline segment as an approximation of actual forks of flows. Relevant illustration of adopted assumptions for 4-segment tracing path is depicted on the next figure.

They make additional check for consistency of inlet and outlet values for subsequent pipe segments. Discrepancy of appropriate elevations cannot be more than elev_tol.

Since inner diameter of the pipe is used as input, the the thickness of the pipe wall additionally considered in heat flux calculations. Pipe wall thickness is derived from pipe diameter using GOST 30732 specifications.

Examples

Run this code

 library(pipenostics)

# Consider 4-segment tracing path depicted in ?m325regtrace help page.
# First, let sensor readings for forward tracing:
t_fw <- 130  # [°C]
p_fw <- mpa_kgf(6)*all.equal(.588399, mpa_kgf(6))  # [MPa]
g_fw <- 250  # [ton/hour]

# Let discharges to network for each pipeline segment are somehow determined as
discharges <- seq(0, 30, 10)  # [ton/hour]

# Then the calculated regime (red squares) for forward tracing is
regime_fw <- m325traceline(t_fw, p_fw, g_fw, discharges, forward = TRUE)
print(regime_fw)

# $temperature
# [1] 129.1799 128.4269 127.9628 127.3367
#
# $pressure
# [1] 0.5878607 0.5874226 0.5872143 0.5870330
#
# $flow_rate
# [1] 250 240 220 190
#
# $loss
# [1] 348.0000 347.1389 346.3483 345.8610
#
# $flux
# [1] 181.9600 181.5097 181.0963 180.8415
#
# $Q
# [1] 5011200 4415607 2493707 2905232


# Next consider values of traced regime as sensor readings for backward tracing:
t_bw <- 127.3367  # [°C]
p_bw <- .5870330  # [MPa]
g_bw <- 190  # [ton/hour]

# Then the calculated regime (red squares) for backward tracing is
regime_bw <- m325traceline(t_bw, p_bw, g_bw, discharges, forward = FALSE)
print(regime_bw)

# $temperature
# [1] 129.9953 129.1769 128.4254 127.9619
#
# $pressure
# [1] 0.5883998 0.5878611 0.5874228 0.5872144
#
# $flow_rate
# [1] 250 250 240 220
#
# $loss
# [1] 347.1358 346.3467 345.8599 345.2035
#
# $flux
# [1] 181.5081 181.0955 180.8410 180.4978
#
# $Q
# [1] 4998755 4405529 2490192 2899710

# Let compare sensor readings with backward tracing results:
tracing <- with(regime_bw, {
  lambda <- function(val, constraint)
    c(val, constraint, constraint - val,
      abs(constraint - val)*100/constraint)
  first <- 1
  structure(
    rbind(
      lambda(temperature[first], t_fw),
      lambda(pressure[first],    p_fw),
      lambda(flow_rate[first], g_fw)
    ),
    dimnames = list(
      c("temperature", "pressure", "flow_rate"),
      c("sensor.value", "traced.value", "abs.discr", "rel.discr")
    )
  )
})
print(tracing)

# sensor.value traced.value     abs.discr    rel.discr
# temperature  129.9952943   130.000000  4.705723e-03 0.0036197868
# pressure       0.5883998     0.588399 -8.215938e-07 0.0001396321
# flow_rate    250.0000000   250.000000  0.000000e+00 0.0000000000