ravetools (version 0.2.2)

design_filter_iir: Design an 'IIR' filter

Description

Design an 'IIR' filter

Usage

design_filter_iir(
  method = c("butter", "cheby1", "cheby2", "ellip"),
  sample_rate,
  filter_order = NA,
  high_pass_freq = NA,
  high_pass_trans_freq = NA,
  low_pass_freq = NA,
  low_pass_trans_freq = NA,
  passband_ripple = 0.1,
  stopband_attenuation = 40
)

Value

A filter in 'Arma' form.

Arguments

method

filter method name, choices are "butter", "cheby1", "cheby2", and "ellip"

sample_rate

sampling frequency

filter_order

suggested filter order. Notice filters with higher orders may become numerically unstable, hence this number is only a suggested number. If the filter is unstable, this function will choose a lower order; leave this input NA (default) if undecided.

high_pass_freq

high-pass frequency; default is NA (no high-pass filter will be applied)

high_pass_trans_freq

high-pass frequency band-width; default is automatically inferred from filter type.

low_pass_freq

low-pass frequency; default is NA (no low-pass filter will be applied)

low_pass_trans_freq

low-pass frequency band-width; default is automatically inferred from filter type.

passband_ripple

allowable pass-band ripple in decibel; default is 0.1

stopband_attenuation

minimum stop-band attenuation (in decibel) at transition frequency; default is 40 dB.

Examples

sample_rate <- 500

my_diagnose <- function(
    filter, vlines = c(8, 12), cutoffs = c(-3, -6)) {
  diagnose_filter(
    b = filter$b,
    a = filter$a,
    fs = sample_rate,
    vlines = vlines,
    cutoffs = cutoffs
  )
}

# ---- Default using butterworth to generate 8-12 bandpass filter ----

# Butterworth filter with cut-off frequency
# 7 ~ 13 (default transition bandwidth is 1Hz) at -3 dB
filter <- design_filter_iir(
  method = "butter",
  low_pass_freq = 12,
  high_pass_freq = 8,
  sample_rate = 500
)

filter

my_diagnose(filter)

## explicit bandwidths and attenuation (sharper transition)

# Butterworth filter with cut-off frequency
# passband ripple is 0.5 dB (8-12 Hz)
# stopband attenuation is 40 dB (5-18 Hz)
filter <- design_filter_iir(
  method = "butter",
  low_pass_freq = 12, low_pass_trans_freq = 6,
  high_pass_freq = 8, high_pass_trans_freq = 3,
  sample_rate = 500,
  passband_ripple = 0.5,
  stopband_attenuation = 40
)

filter

my_diagnose(filter)

# ---- cheby1 --------------------------------

filter <- design_filter_iir(
  method = "cheby1",
  low_pass_freq = 12,
  high_pass_freq = 8,
  sample_rate = 500
)

my_diagnose(filter)

# ---- cheby2 --------------------------------

filter <- design_filter_iir(
  method = "cheby2",
  low_pass_freq = 12,
  high_pass_freq = 8,
  sample_rate = 500
)

my_diagnose(filter)

# ----- ellip ---------------------------------

filter <- design_filter_iir(
  method = "ellip",
  low_pass_freq = 12,
  high_pass_freq = 8,
  sample_rate = 500
)

my_diagnose(filter)