Plot the age-depth model of a core.
agedepth(
set = get("info"),
BCAD = set$BCAD,
depth.unit = "cm",
age.unit = "yr",
unit = depth.unit,
d.lab = c(),
age.lab = c(),
yr.lab = age.lab,
kcal = FALSE,
acc.lab = c(),
d.min = c(),
d.max = c(),
d.by = c(),
depths = set$depths,
depths.file = FALSE,
age.min = c(),
yr.min = age.min,
age.max = c(),
yr.max = age.max,
hiatus.option = 1,
dark = c(),
prob = set$prob,
rounded = 0,
d.res = 400,
age.res = 400,
yr.res = age.res,
date.res = 100,
grey.res = 100,
rotate.axes = FALSE,
rev.age = FALSE,
rev.yr = rev.age,
rev.d = FALSE,
maxcalc = 500,
height = 15,
calheight = 1,
mirror = TRUE,
up = TRUE,
cutoff = 0.001,
plot.range = TRUE,
panels = layout(1),
range.col = grey(0.5),
range.lty = "12",
mn.col = "red",
mn.lty = "12",
med.col = NA,
med.lty = "12",
C14.col = rgb(0, 0, 1, 0.35),
C14.border = rgb(0, 0, 1, 0.5),
cal.col = rgb(0, 0.5, 0.5, 0.35),
cal.border = rgb(0, 0.5, 0.5, 0.5),
dates.col = c(),
pbmodelled.col = function(x) rgb(0, 0, 1, 0.5 * x),
pbmeasured.col = "blue",
pb.lim = c(),
hiatus.col = grey(0.5),
hiatus.lty = "12",
greyscale = grey(seq(1, 0, length = grey.res)),
slump.col = grey(0.8),
normalise.dists = TRUE,
same.heights = FALSE,
cc = set$cc,
title = set$core,
title.location = "top",
after = set$after,
bty = "l",
mar = c(3, 3, 1, 1),
mgp = c(1.5, 0.7, 0),
xaxs = "r",
yaxs = "i",
xaxt = "s",
yaxt = "s",
plot.pb = TRUE,
plot.pdf = FALSE,
dates.only = FALSE,
model.only = FALSE,
verbose = TRUE
)Detailed information of the current run, stored within this session's memory as variable info.
The calendar scale of graphs and age output-files is in cal BP by default, but can be changed to BC/AD using BCAD=TRUE.
Units of the depths. Defaults to depth.unit="cm".
Units of the ages. Defaults to age.unit="yr".
Deprecated and replaced by depth.unit.
The labels for the depth axis. Default d.lab="Depth (cm)". See also depth.unit.
The labels for the calendar axis (default age.lab="cal BP" or "BC/AD" if BCAD=TRUE).
Deprecated - use age.lab instead
Use kcal BP. Default is kcal=FALSE.
The labels for the accumulation rate plot (top middle). Default d.lab="Acc. rate (yr/cm)" (or whatever units you're using).
Minimum depth of age-depth model (use this to extrapolate to depths higher than the top dated depth).
Maximum depth of age-depth model (use this to extrapolate to depths below the bottom dated depth).
Depth intervals at which ages are calculated. Default 1. Alternative depth intervals can be provided using, e.g., d.by=0.5.
By default, Bacon will calculate the ages for the depths d.min to d.max in steps of d.by. Alternative depths can be provided as, e.g., depths=seq(0, 100, length=500) or as a file, e.g., depths=read.table("CoreDepths.txt". See also depths.file.
By default, Bacon will calculate the ages for the depths d.min to d.max in steps of d.by.
If depths.file=TRUE, Bacon will read a file containing the depths for which you require ages.
This file, containing the depths in a single column without a header, should be stored within coredir,
and its name should start with the core's name and end with '_depths.txt'. Then specify depths.file=TRUE (default FALSE). See also depths.
Minimum age of the age-depth plot.
Deprecated - use age.min instead.
Maximum age of the age-depth plot.
Deprecated - use age.min instead.
How to calculate accumulation rates and ages for sections with hiatuses. Either extrapolate from surrounding sections (default, hiatus.option=1), use a w-weighted mix between the prior and posterior values for depths below the hiatus and prior information only for above the hiatus (hiatus.option=2), or use the originally calculated slopes (hiatus.option=0).
Darkness of the greyscale age-depth model. By default, the darkest grey value is calculated as 10 times the height of the lowest-precision age estimate dark=c(). Lower values will result in lighter grey but values >1 are not allowed.
Confidence interval to report (between 0 and 1, default 0.95 or 95%).
Rounding of years. Default is to round to single years.
Resolution or amount of greyscale pixels to cover the depth scale of the age-model plot. Default d.res=200.
Resolution or amount of greyscale pixels to cover the age scale of the age-model plot. Default yr.res=200.
Deprecated - use age.res instead.
Date distributions are plotted using date.res=100 points by default.
Grey-scale resolution of the age-depth model. Default grey.res=100.
By default, the age-depth model is plotted with the depths on the horizontal axis and ages on the vertical axis. This can be changed with rotate.axes=TRUE.
The direction of the age axis, which can be reversed using rev.age=TRUE.
Deprecated - use rev.age instead.
The direction of the depth axis, which can be reversed using rev.d=TRUE.
Number of depths to calculate ages for. If this is more than maxcalc=500, a warning will be shown that calculations will take time.
The maximum heights of the distributions of the dates on the plot. See also normalise.dists.
Multiplier for the heights of the distributions of dates on the calendar scale. Defaults to calheight=1.
Plot the dates as 'blobs'. Set to mirror=FALSE to plot simple distributions.
Directions of distributions if they are plotted non-mirrored. Default up=TRUE.
Avoid plotting very low probabilities of date distributions (default cutoff=0.001).
Whether or not to plot the curves showing the confidence ranges of the age-model. Defaults to (plot.range=TRUE).
Divide the graph panel. Defaults to 1 graph per panel, panels=layout(1). To avoid dividing into panels, use panels=c().
The colour of the curves showing the confidence ranges of the age-model. Defaults to medium grey (range.col=grey(0.5)).
The line type of the curves showing the confidence ranges of the age-model. Defaults to range.lty=12.
The colour of the mean age-depth model: default mn.col="red".
The line type of the mean age-depth model. Default mn.lty=12.
The colour of the median age-depth model: not drawn by default med.col=NA.
The line type of the median age-depth model. Default med.lty=12.
The colour of the calibrated ranges of the dates. Default is semi-transparent blue: C14.col=rgb(0,0,1,.35).
The colours of the borders of calibrated 14C dates. Default is semi-transparent dark blue: C14.border=rgb(0, 0, 1, 0.5).
The colour of the non-14C dates. Default is semi-transparent blue-green: cal.col=rgb(0,.5,.5,.35).
The colour of the border of non-14C dates in the age-depth plot: default semi-transparent dark blue-green: cal.border=rgb(0,.5,.5,.5). Not used by default.
As an alternative to colouring dates based on whether they are 14C or not, sets of dates can be coloured as, e.g., dates.col=colours()[2:100].
Colour of the modelled 210Pb values. Defaults to shades of blue: pbmodelled.col=function(x) rgb(0,0,1,x).
Colour of the measured 210Pb values (default pbmeasured.col="blue"). Draws rectangles of the upper and lower depths as well as the Pb values with 95 percent error ranges.
Axis limits for the Pb-210 data. Calculated automatically by default (pblim=c()).
The colour of the depths of any hiatuses. Default hiatus.col=grey(0.5).
The line type of the depths of any hiatuses. Default hiatus.lty=12.
The function to produce a coloured representation of all age-models. Defaults to grey-scales: greyscale=function(x) grey(1-x).
Colour of slumps. Defaults to slump.col=grey(0.8).
By default, the distributions of more precise dates will cover less time and will thus peak higher than less precise dates. This can be avoided by specifying normalise.dists=FALSE.
Plot the distributions of the dates all at the same maximum height (default same.height=FALSE).
Calibration curve for 14C dates: cc=1 for IntCal13 (northern hemisphere terrestrial), cc=2 for Marine13 (marine), cc=3 for SHCal13 (southern hemisphere terrestrial). For dates that are already on the cal BP scale use cc=0.
The title of the age-depth model is plotted on the main panel. By default this is the core's name. To leave empty: title="".
Location of the title. Default title.location='top'.
Sets a short section above and below hiatus.depths within which to calculate ages. For internal calculations - do not change.
Type of box to be drawn around plots ("n" for none, and "l" (default), "7", "c", "u", or "o" for correspondingly shaped boxes).
Plot margins (amount of white space along edges of axes 1-4). Default mar=c(3,3,1,1).
Axis text margins (where should titles, labels and tick marks be plotted). Defaults to mgp=c(1.5, .7, .0).
Extension of x-axis. By default, add some extra white-space at both extremes (xaxs="r"). See ?par for other options.
Extension of y-axis. By default, add no extra white-space at both extremes (yaxs="i"). See ?par for other options.
Whether or not to plot the x-axis. Can be used to adapt axes after a plot. See ?par for other options.
Whether or not to plot the y-axis. Can be used to adapt axes after a plot. See ?par for other options.
Plot the 210Pb data. Defaults to plot.pb=TRUE.
Produce a pdf file of the age-depth plot.
By default, the age-depth model is plotted on top of the dates. This can be avoided by supplying dates.only=TRUE.
By default, panels showing the MCMC iterations and the priors and posteriors for accumulation rate and memory are plotted above the main age-depth model panel. This can be avoided by supplying model.only=TRUE. Note however that this removes relevant information to evaluate the age-depth model, so we do recommend to present age-models together with these upper panels.
Provide a summary of the age ranges after producing the age-depth model graph; default verbose=FALSE.
A plot of the age-depth model, and estimated ages incl. confidence ranges for each depth.
After loading a previous run, or after running either the scissors or thinner command, plot the age-model
again using the command agedepth().
Blaauw, M. and Christen, J.A., Flexible paleoclimate age-depth models using an autoregressive gamma process. Bayesian Analysis 6 (2011), no. 3, 457--474. https://projecteuclid.org/euclid.ba/1339616472
# NOT RUN {
Bacon(ask=FALSE, coredir=tempfile())
agedepth()
# }
Run the code above in your browser using DataLab