psych (version 1.8.12)

statsBy: Find statistics (including correlations) within and between groups for basic multilevel analyses

Description

When examining data at two levels (e.g., the individual and by some set of grouping variables), it is useful to find basic descriptive statistics (means, sds, ns per group, within group correlations) as well as between group statistics (over all descriptive statistics, and overall between group correlations). Of particular use is the ability to decompose a matrix of correlations at the individual level into correlations within group and correlations between groups.

Usage

statsBy(data, group, cors = FALSE, cor="cor", method="pearson", use="pairwise", 
poly=FALSE, na.rm=TRUE,alpha=.05)
statsBy.boot(data,group,ntrials=10,cors=FALSE,replace=TRUE,method="pearson")
statsBy.boot.summary(res.list,var="ICC2")
faBy(stats, nfactors = 1, rotate = "oblimin", fm = "minres", free = TRUE, all=FALSE,
   min.n = 12,quant=.1, ...)

Arguments

data

A matrix or dataframe with rows for subjects, columns for variables. One of these columns should be the values of a grouping variable.

group

The names or numbers of the variable in data to use as the grouping variables.

cors

Should the results include the correlation matrix within each group? Default is FALSE.

cor

Type of correlation/covariance to find within groups and between groups. The default is Pearson correlation. To find within and between covariances, set cor="cov". Although polychoric, tetrachoric, and mixed correlations can be found within groups, this does not make sense for the between groups or the pooled within groups. In this case, correlations for each group will be as specified, but the between groups and pooled within will be Pearson. See the discussion below.

method

What kind of correlations should be found (default is Pearson product moment)

use

How to treat missing data. use="pairwise" is the default

poly

Find polychoric.tetrachoric correlations within groups if requested.

na.rm

Should missing values be deleted (na.rm=TRUE) or should we assume the data clean?

alpha

The alpha level for the confidence intervals for the ICC1 and ICC2

ntrials

The number of trials to run when bootstrapping statistics

replace

Should the bootstrap be done by permuting the data (replace=FALSE) or sampling with replacement (replace=TRUE)

res.list

The results from statsBy.boot may be summarized using boot.stats

var

Name of the variable to be summarized from statsBy.boot

stats

The output of statsBy

nfactors

The number of factors to extract in each subgroup

rotate

The factor rotation/transformation

fm

The factor method (see fa for details)

free

Allow the factor solution to be freely estimated for each individual (see note).

all

Report individual factor analyses for each group as well as the summary table

min.n

The minimum number of within subject cases before we factor analyze it.

quant

Show the upper and lower quant quantile of the factor loadings in faBy

...

Other parameters to pass to the fa function

Value

means

The means for each group for each variable.

sd

The standard deviations for each group for each variable.

n

The number of cases for each group and for each variable.

ICC1

The intraclass correlation reflects the amount of total variance associated with the grouping variable.

ICC2

The intraclass correlation (2) reflecting how much the groups means differ.

ci1

The confidence intervals for the ICC1

ci2

The confidence intervals for the ICC2

F

The F from a one-way anova of group means.

rwg

The pooled within group correlations.

rbg

The sample size weighted between group correlations.

etawg

The correlation of the data with the within group values.

etabg

The correlation of the data with the group means.

pbg

The probability of the between group correlation

pwg

The probability of the within group correlation

r

In the case that we want the correlations in each group, r is a list of the within group correlations for every group. Set cors=TRUE

within

is just another way of displaying these correlations. within is a matrix which reports the lower off diagonal correlations as one row for each group.

pooled

The sample size weighted correlations. This is just within weighted by the sample sizes. The cors option must be set to TRUE to get this. See the note.

Details

Multilevel data are endemic in psychological research. In multilevel data, observations are taken on subjects who are nested within some higher level grouping variable. The data might be experimental (participants are nested within experimental conditions) or observational (students are nested within classrooms, students are nested within college majors.) To analyze this type of data, one uses random effects models or mixed effect models, or more generally, multilevel models. There are at least two very powerful packages (nlme and multilevel) which allow for complex analysis of hierarchical (multilevel) data structures. statsBy is a much simpler function to give some of the basic descriptive statistics for two level models. It is meant to supplement true multilevel modeling.

For a group variable (group) for a data.frame or matrix (data), basic descriptive statistics (mean, sd, n) as well as within group correlations (cors=TRUE) are found for each group.

The amount of variance associated with the grouping variable compared to the total variance is the type 1 IntraClass Correlation (ICC1): \(ICC1 = (MSb-MSw)/(MSb + MSw*(npr-1))\) where npr is the average number of cases within each group.

The reliability of the group differences may be found by the ICC2 which reflects how different the means are with respect to the within group variability. \(ICC2 = (MSb-MSw)/MSb\). Because the mean square between is sensitive to sample size, this estimate will also reflect sample size.

Perhaps the most useful part of statsBy is that it decomposes the observed correlations between variables into two parts: the within group and the between group correlation. This follows the decomposition of an observed correlation into the pooled correlation within groups (rwg) and the weighted correlation of the means between groups discussed by Pedazur (1997) and by Bliese in the multilevel package.

\(r_{xy} = eta_{x_{wg}} * eta_{y_{wg}} * r_{xy_{wg}} + eta_{x_{bg}} * eta_{y_{bg}} * r_{xy_{bg}} \)

where \(r_{xy}\) is the normal correlation which may be decomposed into a within group and between group correlations \(r_{xy_{wg}}\) and \(r_{xy_{bg}}\) and eta is the correlation of the data with the within group values, or the group means.

It is important to realize that the within group and between group correlations are independent of each other. That is to say, inferring from the 'ecological correlation' (between groups) to the lower level (within group) correlation is inappropriate. However, these between group correlations are still very meaningful, if inferences are made at the higher level.

There are actually two ways of finding the within group correlations pooled across groups. We can find the correlations within every group, weight these by the sample size and then report this pooled value (pooled). This is found if the cors option is set to TRUE. It is logically equivalent to doing a sample size weighted meta-analytic correlation. The other way, rwg, considers the covariances, variances, and thus correlations when each subject's scores are given as deviation score from the group mean.

If finding tetrachoric, polychoric, or mixed correlations, these two estimates will differ, for the pooled value is the weighted polychoric correlation, but the rwg is the Pearson correlation.

Confidence values and significance of \(r_{xy_{wg}}\), pwg, reflect the pooled number of cases within groups, while \(r_{xy_{bg}} \), pbg, the number of groups. These are not corrected for multiple comparisons.

withinBetween is an example data set of the mixture of within and between group correlations. sim.multilevel will generate simulated data with a multilevel structure.

The statsBy.boot function will randomize the grouping variable ntrials times and find the statsBy output. This can take a long time and will produce a great deal of output. This output can then be summarized for relevant variables using the statsBy.boot.summary function specifying the variable of interest. These two functions are useful in order to find if the mere act of grouping leads to large between group correlations.

Consider the case of the relationship between various tests of ability when the data are grouped by level of education (statsBy(sat.act,"education")) or when affect data are analyzed within and between an affect manipulation (statsBy(flat,group="Film") ). Note in this latter example, that because subjects were randomly assigned to Film condition for the pretest, that the pretest ICC1s cluster around 0.

faBy uses the output of statsBy to perform a factor analysis on the correlation matrix within each group. If the free parameter is FALSE, then each solution is rotated towards the group solution (as much as possible). The output is a list of each factor solution, as well as a summary matrix of loadings and interfactor correlations for all groups.

References

Pedhazur, E.J. (1997) Multiple regression in behavioral research: explanation and prediction. Harcourt Brace.

See Also

describeBy and the functions within the multilevel package.

Examples

Run this code
# NOT RUN {
#Taken from Pedhazur, 1997
pedhazur <- structure(list(Group = c(1L, 1L, 1L, 1L, 1L, 2L, 2L, 2L, 2L, 
2L), X = c(5L, 2L, 4L, 6L, 3L, 8L, 5L, 7L, 9L, 6L), Y = 1:10), .Names = c("Group", 
"X", "Y"), class = "data.frame", row.names = c(NA, -10L))
pedhazur
ped.stats <- statsBy(pedhazur,"Group")
ped.stats


#Now do this for the sat.act data set
sat.stats <- statsBy(sat.act,c("education","gender"),cor=TRUE)   #group by two grouping variables
print(sat.stats,short=FALSE)
lowerMat(sat.stats$pbg)  #get the probability values

#show means by groups
round(sat.stats$mean)

#Do separate factor analyses for each group
#faBy(sat.stats,1)



# }

Run the code above in your browser using DataCamp Workspace