Estimates Ripley's reduced second moment function \(K(r)\) from a point pattern in a window of arbitrary shape.

```
Kest(X, …, r=NULL, rmax=NULL, breaks=NULL,
correction=c("border", "isotropic", "Ripley", "translate"),
nlarge=3000, domain=NULL, var.approx=FALSE, ratio=FALSE)
```

X

The observed point pattern,
from which an estimate of \(K(r)\) will be computed.
An object of class `"ppp"`

, or data
in any format acceptable to `as.ppp()`

.

…

Ignored.

r

Optional. Vector of values for the argument \(r\) at which \(K(r)\)
should be evaluated. Users are advised *not* to specify this
argument; there is a sensible default. If necessary, specify `rmax`

.

rmax

Optional. Maximum desired value of the argument \(r\).

breaks

This argument is for internal use only.

correction

Optional. A character vector containing any selection of the
options `"none"`

, `"border"`

, `"bord.modif"`

,
`"isotropic"`

, `"Ripley"`

, `"translate"`

,
`"translation"`

, `"rigid"`

,
`"none"`

, `"good"`

or `"best"`

.
It specifies the edge correction(s) to be applied.
Alternatively `correction="all"`

selects all options.

nlarge

Optional. Efficiency threshold.
If the number of points exceeds `nlarge`

, then only the
border correction will be computed (by default), using a fast algorithm.

domain

Optional. Calculations will be restricted to this subset of the window. See Details.

var.approx

Logical. If `TRUE`

, the approximate
variance of \(\hat K(r)\) under CSR
will also be computed.

ratio

Logical.
If `TRUE`

, the numerator and denominator of
each edge-corrected estimate will also be saved,
for use in analysing replicated point patterns.

An object of class `"fv"`

, see `fv.object`

,
which can be plotted directly using `plot.fv`

.

Essentially a data frame containing columns

the vector of values of the argument \(r\) at which the function \(K\) has been estimated

the theoretical value \(K(r) = \pi r^2\) for a stationary Poisson process

If var.approx=TRUE then the return value also has columns rip and ls containing approximations to the variance of \hat K(r)Kest(r) under CSR.

If ratio=TRUE then the return value also has two attributes called "numerator" and "denominator" which are "fv" objects containing the numerators and denominators of each estimate of K(r).

To compute simulation envelopes for the \(K\)-function
under CSR, use `envelope`

.

To compute a confidence interval for the true \(K\)-function,
use `varblock`

or `lohboot`

.

The estimator of \(K(r)\) is approximately unbiased for each fixed \(r\). Bias increases with \(r\) and depends on the window geometry. For a rectangular window it is prudent to restrict the \(r\) values to a maximum of \(1/4\) of the smaller side length of the rectangle. Bias may become appreciable for point patterns consisting of fewer than 15 points.

While \(K(r)\) is always a non-decreasing function, the estimator of \(K\) is not guaranteed to be non-decreasing. This is rarely a problem in practice.

The \(K\) function (variously called ``Ripley's K-function'' and the ``reduced second moment function'') of a stationary point process \(X\) is defined so that \(\lambda K(r)\) equals the expected number of additional random points within a distance \(r\) of a typical random point of \(X\). Here \(\lambda\) is the intensity of the process, i.e. the expected number of points of \(X\) per unit area. The \(K\) function is determined by the second order moment properties of \(X\).

An estimate of \(K\) derived from a spatial point pattern dataset can be used in exploratory data analysis and formal inference about the pattern (Cressie, 1991; Diggle, 1983; Ripley, 1977, 1988). In exploratory analyses, the estimate of \(K\) is a useful statistic summarising aspects of inter-point ``dependence'' and ``clustering''. For inferential purposes, the estimate of \(K\) is usually compared to the true value of \(K\) for a completely random (Poisson) point process, which is \(K(r) = \pi r^2\). Deviations between the empirical and theoretical \(K\) curves may suggest spatial clustering or spatial regularity.

This routine `Kest`

estimates the \(K\) function
of a stationary point process, given observation of the process
inside a known, bounded window.
The argument `X`

is interpreted as a point pattern object
(of class `"ppp"`

, see `ppp.object`

) and can
be supplied in any of the formats recognised by
`as.ppp()`

.

The estimation of \(K\) is hampered by edge effects arising from the unobservability of points of the random pattern outside the window. An edge correction is needed to reduce bias (Baddeley, 1998; Ripley, 1988). The corrections implemented here are

- border
the border method or ``reduced sample'' estimator (see Ripley, 1988). This is the least efficient (statistically) and the fastest to compute. It can be computed for a window of arbitrary shape.

- isotropic/Ripley
Ripley's isotropic correction (see Ripley, 1988; Ohser, 1983). This is implemented for rectangular and polygonal windows (not for binary masks).

- translate/translation
Translation correction (Ohser, 1983). Implemented for all window geometries, but slow for complex windows.

- rigid
Rigid motion correction (Ohser and Stoyan, 1981). Implemented for all window geometries, but slow for complex windows.

- none
Uncorrected estimate. An estimate of the K function

*without*edge correction. (i.e. setting \(e_{ij} = 1\) in the equation below. This estimate is**biased**and should not be used for data analysis,*unless*you have an extremely large point pattern (more than 100,000 points).- best
Selects the best edge correction that is available for the geometry of the window. Currently this is Ripley's isotropic correction for a rectangular or polygonal window, and the translation correction for masks.

- good
Selects the best edge correction that can be computed in a reasonable time. This is the same as

`"best"`

for datasets with fewer than 3000 points; otherwise the selected edge correction is`"border"`

, unless there are more than 100,000 points, when it is`"none"`

.

The estimates of \(K(r)\) are of the form
$$
\hat K(r) = \frac a {n (n-1) } \sum_i \sum_j I(d_{ij}\le r) e_{ij}
$$
where \(a\) is the area of the window, \(n\) is the number of
data points, and the sum is taken over all ordered pairs of points
\(i\) and \(j\) in `X`

.
Here \(d_{ij}\) is the distance between the two points,
and \(I(d_{ij} \le r)\) is the indicator
that equals 1 if the distance is less than or equal to \(r\).
The term \(e_{ij}\) is the edge correction weight (which
depends on the choice of edge correction listed above).

Note that this estimator assumes the process is stationary (spatially
homogeneous). For inhomogeneous point patterns, see
`Kinhom`

.

If the point pattern `X`

contains more than about 3000 points,
the isotropic and translation edge corrections can be computationally
prohibitive. The computations for the border method are much faster,
and are statistically efficient when there are large numbers of
points. Accordingly, if the number of points in `X`

exceeds
the threshold `nlarge`

, then only the border correction will be
computed. Setting `nlarge=Inf`

or `correction="best"`

will prevent this from happening.
Setting `nlarge=0`

is equivalent to selecting only the border
correction with `correction="border"`

.

If `X`

contains more than about 100,000 points,
even the border correction is time-consuming. You may want to consider
setting `correction="none"`

in this case.
There is an even faster algorithm for the uncorrected estimate.

Approximations to the variance of \(\hat K(r)\)
are available, for the case of the isotropic edge correction estimator,
**assuming complete spatial randomness**
(Ripley, 1988; Lotwick and Silverman, 1982; Diggle, 2003, pp 51-53).
If `var.approx=TRUE`

, then the result of
`Kest`

also has a column named `rip`

giving values of Ripley's (1988) approximation to
\(\mbox{var}(\hat K(r))\),
and (if the window is a rectangle) a column named `ls`

giving
values of Lotwick and Silverman's (1982) approximation.

If the argument `domain`

is given, the calculations will
be restricted to a subset of the data. In the formula for \(K(r)\) above,
the *first* point \(i\) will be restricted to lie inside
`domain`

. The result is an approximately unbiased estimate
of \(K(r)\) based on pairs of points in which the first point lies
inside `domain`

and the second point is unrestricted.
This is useful in bootstrap techniques. The argument `domain`

should be a window (object of class `"owin"`

) or something acceptable to
`as.owin`

. It must be a subset of the
window of the point pattern `X`

.

The estimator `Kest`

ignores marks.
Its counterparts for multitype point patterns
are `Kcross`

, `Kdot`

,
and for general marked point patterns
see `Kmulti`

.

Some writers, particularly Stoyan (1994, 1995) advocate the use of
the ``pair correlation function''
$$
g(r) = \frac{K'(r)}{2\pi r}
$$
where \(K'(r)\) is the derivative of \(K(r)\).
See `pcf`

on how to estimate this function.

Baddeley, A.J. Spatial sampling and censoring.
In O.E. Barndorff-Nielsen, W.S. Kendall and
M.N.M. van Lieshout (eds)
*Stochastic Geometry: Likelihood and Computation*.
Chapman and Hall, 1998.
Chapter 2, pages 37--78.

Cressie, N.A.C. *Statistics for spatial data*.
John Wiley and Sons, 1991.

Diggle, P.J. *Statistical analysis of spatial point patterns*.
Academic Press, 1983.

Ohser, J. (1983)
On estimators for the reduced second moment measure of
point processes. *Mathematische Operationsforschung und
Statistik, series Statistics*, **14**, 63 -- 71.

Ohser, J. and Stoyan, D. (1981)
On the second-order and orientation analysis of
planar stationary point processes.
*Biometrical Journal* **23**, 523--533.

Ripley, B.D. (1977)
Modelling spatial patterns (with discussion).
*Journal of the Royal Statistical Society, Series B*,
**39**, 172 -- 212.

Ripley, B.D. *Statistical inference for spatial processes*.
Cambridge University Press, 1988.

Stoyan, D, Kendall, W.S. and Mecke, J. (1995)
*Stochastic geometry and its applications*.
2nd edition. Springer Verlag.

Stoyan, D. and Stoyan, H. (1994) Fractals, random shapes and point fields: methods of geometrical statistics. John Wiley and Sons.

`localK`

to extract individual summands in the \(K\)
function.

`pcf`

for the pair correlation.

`Fest`

,
`Gest`

,
`Jest`

for alternative summary functions.

`Kcross`

,
`Kdot`

,
`Kinhom`

,
`Kmulti`

for counterparts of the \(K\) function
for multitype point patterns.

`reduced.sample`

for the calculation of reduced sample
estimators.

```
# NOT RUN {
X <- runifpoint(50)
K <- Kest(X)
K <- Kest(cells, correction="isotropic")
plot(K)
plot(K, main="K function for cells")
# plot the L function
plot(K, sqrt(iso/pi) ~ r)
plot(K, sqrt(./pi) ~ r, ylab="L(r)", main="L function for cells")
# }
```

Run the code above in your browser using DataCamp Workspace